Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Monitoring Physical Servers

Service and Infrastructure Monitor tracks the state of each physical server on which the Icinga agent is installed.

To monitor physical servers:

In the left navigation bar, click select Infrastructure > CSP Bare Metal.
Service and Infrastructure Monitor displays an array of physical servers and monitoring parameters.
In the array, hover over an entry to see additional information for the entry.
Click a colored square to see detailed information for the entry.

See Table 1 for information about the parameters.

Table 1: Parameters for Monitoring Physical Servers
Parameters	Meaning
Group Status	State of the server cluster and the time when it entered that state. Up—Operational Down—Not operational
Number of Servers	Number of servers in the server cluster.
Server Status	Number of servers in a colored square that indicates the status of the servers. When you click the square you see: An entry for each server in the cluster. The status of the server. The IP address of the server. The hostname of the server. The result from the last ping the Icinga agent sent to the server, including any loss of packets, and the round trip average (RTA) travel time.
Commands	Total number of commands issued to monitor the status of the server since it became operational.
Command Status	Result of the commands issued to monitor the status of the server. When you click the square you see: A list of parameters for a specific server. The state of the parameter and how long the parameter has been in that state. Additional details about the state of the server.