- play_arrow Configuration
- play_arrow Creating Bundles
- play_arrow Configuring CESoPSN Bundles (CTP Menu)
- Configuring T1 and E1 Port Parameters for CESoPSN Bundles (CTP Menu)
- Configuring T1 Port to E1 Port for CESoPSN Bundles (CTP Menu)
- Configuring Analog Port Parameters for CESoPSN Bundles (CTP Menu)
- Configuring Serial Port Parameters for CESoPSN Bundles (CTP Menu)
- Configuring DS0 Time Slots for CESoPSN Bundles (CTP Menu)
- Configuring IP Parameters for CESoPSN Bundles on CTP2000 Devices (CTP Menu)
- Configuring IP Parameters for CESoPSN Bundles on CTP150 Devices (CTP Menu)
- Configuring Virtual IP Parameters for CESoPSN Bundles (CTP Menu)
- Configuring the Missing Packet Fill Pattern for CESoPSN Bundles on CTP150 Devices (CTP Menu)
- Configuring Circuit Restart Parameters for CESoPSN Bundles on CTP150 Devices (CTP Menu)
- Configuring UDP Source and Destination Port Matching for CESoPSN Bundles (CTP Menu)
- Configuring Multiservice 4WTO Mode Port Parameters for CESoPSN Bundles on CTP150 and CTP151 Devices (CTP Menu)
- play_arrow Configuring CESoPSN Bundles (CTPView)
- Configuring T1 and E1 Port Parameters for CESoPSN Bundles (CTPView)
- Configuring Analog Port Parameters for CESoPSN Bundles (CTPView)
- Configuring Serial Port Parameters for CESoPSN Bundles (CTPView)
- Configuring DS0 Time Slots for CESoPSN Bundles (CTPView)
- Configuring IP Parameters for CESoPSN Bundles on CTP2000 Devices (CTPView)
- Configuring IP Parameters for CESoPSN Bundles on CTP150 Devices (CTPView)
- Configuring Virtual IP Parameters for CESoPSN Bundles (CTPView)
- Configuring the Missing Packet Fill Pattern for CESoPSN Bundles on CTP150 Devices (CTPView)
- Configuring Circuit Restart Parameters for CESoPSN Bundles on CTP150 Devices (CTPView)
- Configuring UDP Source and Destination Port Matching for CESoPSN Bundles (CTPView)
- Configuring Multiservice 4WTO Mode Port Parameters for CESoPSN Bundles on CTP150 and CTP151 Devices (CTPView)
-
- play_arrow Administration
- play_arrow Diagnostic Testing for CESoPSN Bundles Overview
- play_arrow Configuring Diagnostic Testing for CESoPSN Bundles
- play_arrow Displaying BERT Status and Counters for CESoPSN Bundles
-
Interface Naming Conventions for the CTP Series
In the CTP software, interfaces are specified in the format:
type-slot/port
where
type | Type of interface. A two-character abbreviation. |
slot | Slot number on the CTP device. |
port | Port number on the CTP device. |
If the interface module has a daughter card installed, the interface format is as follows:
type-slot/port w/daughter-card
Interface Type | Type Specifier |
---|---|
4WE&M | 4w |
4WTO | 4w |
E1 | e1 |
2W-FXO | fo |
2W-FSX | fs |
IRIG | irig |
Serial | se |
T1 | t1 |
T1E1 | t1e1 |