Configuring 4WTO Daughter Cards to Interoperate with Multiservice Interface Modules (CTPView)

date_range 26-May-23

Interoperability of Multiservice Interface modules with 4WTO daughter cards requires the following:

When you enable interoperability of the 4WTO daughter card with Multiservice Interface modules, the port speed for the bundle is set as follows:

Before you begin:

Log in to the CTPView software at least at the Net_Admin level.
Connect the CTPView server to the CTP device for which you want to configure bundles.

To configure 4WTO daughter cards to interoperate with Multiservice Interface module using CTPView:

In the side pane, select Bundle > Configuration.
Run your mouse over the Display and Select an Existing Bundle bar.
In the table of bundles, select the bundle that you want to modify.
Under Port Options, configure the MS Interwork parameter as described in Table 1 .
Click Click to Submit Bundle AND Port Changes.

Table 1: CTP Bundle 4WTO Interoperability Parameter Setting in CTPView
Field	Function	Your Action
MS Interwork	Enables or disables interoperability of the 4WTO daughter card with Multiservice Interface modules.	ENABLED—Interoperability with the Multiservice Interface module is enabled. DISABLED—Interoperability with the Multiservice Interface module is disabled.

Using Multiservice Interface Modules

Helped me install or use the product
Accelerated my deployment

Discuss the product with a co-worker
Make a purchase inquiry