close
keyboard_arrow_left
Table of Contents
- play_arrow Overview
- play_arrow Overview of Bundles in the CTP Series
- play_arrow VComp Bundle Overview
- play_arrow Interface Modules That Support Voice Compression Overview
-
- play_arrow Administration
- play_arrow Changing the Status of Bundles
- play_arrow Displaying Runtime Information for VComp Bundles
-
- play_arrow Troubleshooting
- play_arrow Knowledge Base
-
list Table of Contents
Configuring 4WE&M Port Parameters for VComp Bundles (CTPView)
date_range
26-May-23
This topic describes how to configure port parameters for 4WE&M interfaces.
Before you begin:
Log in to the CTPView software at least at the Net_Admin level.
Connect the CTPView server to the CTP device for which you want to configure bundles.
Disable the bundle before you modify the bundle options.
To configure port parameters for 4WE&M interfaces using CTPView:
- In the side pane, select Bundle > Configuration.
- Run your mouse over the Display and Select an Existing Bundle bar.
- In the table of bundles, select the bundle that you want to modify.
- Under Port Options, configure the parameters described in Table 1.
- Click Click to Submit Bundle AND Port Changes.
| Field | Function | Your Action |
|---|---|---|
Voice Port Tx Gain [ -23.8 to 1.6 dB ] | Specifies the gain in the direction from the analog interface toward the IP network. | Select a dB value from the list. |
Voice Port Rx Gain [ -7.6 to 17.7 dB ] | Specifies the gain in the direction from the IP network to the analog interface. | Select a dB value from the list. |
