Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Announcement: Try the Ask AI chatbot for answers to your technical questions about Juniper products and solutions.

close
header-navigation
keyboard_arrow_up
close
keyboard_arrow_left
list Table of Contents
file_download PDF
{ "lLangCode": "en", "lName": "English", "lCountryCode": "us", "transcode": "en_US" }
English
keyboard_arrow_right

Extreme NAC

date_range 27-Mar-21

The Extreme NAC DSM for JSA accepts events by using syslog. JSA records all relevant events.

For details on configuring your Extreme NAC appliances for syslog, consult your vendor documentation. After the Extreme NAC appliance is forwarding syslog events to JSA, the configuration is complete. The log source is added to JSA as Extreme NAC events are automatically discovered. Events that are forwarded by Extreme NAC appliances are displayed on the Log Activity tab of JSA.

Syslog Log Source Parameters for Extreme NAC

If JSA does not automatically detect the log source, add a Extreme NAC log source on the JSA Console by using the syslog protocol.

When using the syslog protocol, there are specific parameters that you must use.

The following table describes the parameters that require specific values to collect syslog events from Extreme NAC:

Table 1: Syslog Log Source Parameters for the Extreme NAC DSM

Parameter

Value

Log Source type

Extreme NAC

Protocol Configuration

Syslog

Log Source Identifier

Type the IP address or host name for the log source as an identifier for events from your Extreme NAC devices.

footer-navigation