Generic SNMP Adapter
JSA Risk Manager supports appliances that run an SNMP agent with the generic SNMP adapter.
This adapter interacts with the SNMP agent by using SNMP queries.
The object identifiers (OIDs) are contained in SNMP MIB-2, and you can expect all SNMP agents to expose these OIDs.
The following are adapter limitations:
Collects basic interface and basic system information only. Rules and routing information are not collected.
Even though displayed in the Configuration Source Management UI, with SNMPv3, the adapter does not support AES encryption.
The adapter does not support AES encryption with SNMPv3, even though it might appear to support it in the Configuration Source Management window.
The integration requirements for the generic SNMP adapter are described in following table:
Integration Requirement |
Description |
|---|---|
Version |
SNMPv1, SNMPv2c, SNMPv3 |
Neighbor data support |
No |
SNMP discovery |
No |
Required credential parameters To add credentials in JSA log in as an administrator and use Configuration Source Management on the Admin tab. |
SNMPv1 and SNMPv2c require SNMP Get Community SNMPv3 requires SNMPv3 Authentication Username SNMPv3 can have either one of the following credentials: SNMPv3 Authentication Password SNMPv3 Privacy Password |
Supported connection protocols To add protocols in JSA, log in as an administrator and use Configuration Source Management on the Admin tab. |
Use any one of the following supported connection protocols: SNMPv1 SNMPv2c SNMPv3 using MD5 SHA with DES |
Commands that the adapter requires to log in and collect data |
SNMP Get commands .1.3.6.1.2.1.1.1.0 .1.3.6.1.2.1.1.2.0 .1.3.6.1.2.1.1.3.0 .1.3.6.1.2.1.1.4.0 .1.3.6.1.2.1.1.5.0 .1.3.6.1.2.1.1.6.0 SNMP Walk commands .1.3.6.1.2.1.2.2.1.2 .1.3.6.1.2.1.2.2.1.3 .1.3.6.1.2.1.2.2.1.4 .1.3.6.1.2.1.2.2.1.5 .1.3.6.1.2.1.2.2.1.6 .1.3.6.1.2.1.2.2.1.7 .1.3.6.1.2.1.4.20 |