Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Adding a Microsoft SCCM Scanner

Ensure that WMI is enabled on your scanner host.

Before you can add a Microsoft SCCM scanner, WMI must be enabled on your scanner host.

  1. Click the Admin tab.
  2. Click the VA Scanners icon.
  3. Click Add.
  4. In the Scanner Name field, type a name to identify your Microsoft SCCM server.
  5. From the Managed Host list, select an option that is based on one of the following platforms:

    • On the JSA Console, select the managed host that is responsible for communicating with the scanner device.

  6. From the Type list, select Microsoft SCCM, and then configure the parameters.

    Parameter

    Description

    Host Name

    The IP address or host name of the remote server that hosts the scan result files.

    Domain

    The domain that is used to connect to the remote server.

  7. Configure the remaining parameters.
  8. To configure a CIDR range for your scanner, complete the following steps:

    1. Type the CIDR range that you want this scanner to consider or click Browse to select a CIDR range from the network list.

    2. Click Add.

  9. Click Save.

Related Documentation