Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Configuring Topology Acquisition Using BGP-LS

To configure BGP-LS topology acquisition on Juniper routers, perform the following configuration steps:

  1. Specify the autonomous system (AS) number for the node (BGP peer).
  2. Specify the BGP group name and type for the node.
  3. Specify a description for the BGP group for the node.
  4. Enable the traffic engineering features for the BGP routing protocol.
  5. Specify the IP address for the installer node from which Paragon Automation is deployed.