restart chassis-control

Syntax

Syntax (TX Matrix Routers)

Syntax (TX Matrix Plus Routers)

Description

Restart the chassis management process.

Note:

When GRES is configured and the restart chassis-control command is executed on a TX Matrix Plus router with 3D SIBs, we cannot ascertain which Routing Engine becomes a primary. This is due to the chassisd restart. The chassis process or chassisd is responsible for maintaining and retaining primary role and when it is restarted, the new chassisd is processed based on the router load. This results in one of the Routing Engines being made primary.

Options

lcc `number`	(Routing matrix only) (Optional) Restart the software process for a specific routing node that is connected to a PTX Matrix platform. Replace `number` with a value from 0 through 3.
sfc `number`	(PTX routers only) (Optional) Restart the software process on the PTX series router (or switch-fabric chassis). Replace `number` with 0.
gracefully	(Optional) Restart the software process.
immediately	(Optional) Immediately restart the software process. Note: For PTX Series routers, when the `restart chassis-control` command is executed with the `immediately` option set, the PFE’s state will be reset to enabled regardless of whether or not the PFE’s state is set to disabled when the action occurs.
soft	(Optional) Reread and reactivate the configuration without completely restarting the software processes. For example, Border Gateway Protocol (BGP) peers stay up and the routing table stays constant. Omitting this option results in a graceful restart of the software process.

Required Privilege Level

reset

Output Fields

When you enter this command, you are provided feedback on the status of your request.