request chassis satellite disable
Syntax
request chassis satellite disable
<device-alias alias-name>
<fpc-slot fpc-slot>
Description
Disable the specified satellite device from the Junos Fusion.
When a satellite device is disabled from a Junos Fusion, all extended ports are immediately placed in the down state. The satellite device cannot send or receive traffic for the Junos Fusion until it is reenabled.
This command is useful whenever you need to disable a satellite device from a Junos Fusion, such as for troubleshooting scenarios. If you are removing a satellite device from a Junos Fusion to use the device elsewhere on the network, use the request chassis satellite install command to install Junos OS onto your satellite device before removing it from the Junos Fusion. See Removing a Satellite Device from a Junos Fusion.
You can reenable a satellite device that was disabled using this command using the request chassis satellite enable command.
Options
| device-alias alias-name | Disable the satellite device with the specified alias name from the Junos Fusion. |
| fpc fpc-slot | Disable the satellite device with the specified FPC slot identifier from the Junos Fusion. |
Required Privilege Level
system-control
Sample Output
request chassis satellite disable device-alias satellite-01
user@aggregation-device> request chassis satellite disable device-alias satellite-01
Sample Output
request chassis satellite disable fpc-slot 101
user@aggregation-device> request chassis satellite disable fpc-slot 101
Release Information
Command introduced in Junos OS Release 14.2R3.