request chassis spmb restart

Syntax

Restart the specified Switch Processor Mezzanine Board (SPMB) on the Control Board (CB).

all-members	(MX2010, MX2020, and MX2008 routers only) (Optional) Restart the SPMB on the CB in all members of the Virtual Chassis configuration.
lcc `number`	(TX Matrix router and TX Matrix Plus router only) (Optional) Line-card chassis number. Replace `number` with the following values depending on the LCC configuration: 0 through 3, when T640 routers are connected to a TX Matrix router in a routing matrix. 0 through 3, when T1600 routers are connected to a TX Matrix Plus router in a routing matrix. 0 through 7, when T1600 routers are connected to a TX Matrix Plus router with 3D SIBs in a routing matrix. 0, 2, 4, or 6, when T4000 routers are connected to a TX Matrix Plus router with 3D SIBs in a routing matrix.
local	(MX2010, MX2020, and MX2008 routers only) (Optional) Restart the SPMB on the CB in the local Virtual Chassis member.
member `member-id`	(MX2010, MX2020, and MX2008 routers only) (Optional) Restart the SPMB on the CB in the specified member of the Virtual Chassis. Replace `member-id` with the value 0 or 1.
scc	(TX Matrix routers only) TX Matrix router (switch-card chassis) in the routing matrix.
sfc `number`	(TX Matrix Plus routers only) The switch-fabric chassis number of the TX Matrix Plus router. Replace the `number` variable with a value `0`.
slot `slot-number`	The SPMB slot number. Replace `slot-number` with `0` or `1`.

maintenance

When you enter this command, you are provided feedback on the status of your request.

Command introduced before Junos OS Release 7.4.

sfc option for the TX Matrix Plus router introduced in Junos OS Release 9.6.

all-members, local, and member member-id options introduced in Junos OS Release 15.1 for MX2020 and MX2010 routers.