show class-of-service traffic-control-profile
Syntax
show class-of-service traffic-control-profile <profile-name>
Description
Display information on traffic shaping and scheduling profiles.
Options
| none |
Display all profiles. |
| profile-name |
(Optional) Display information about a single profile. |
Required Privilege Level
view
Output Fields
Table 1 describes the
possible
output fields for the show class-of-service
traffic-control-profile command.
The output fields that
display depend on the platform and software device of your device. Output
fields are listed in the approximate order in which they appear.
|
Field Name |
Field Description |
|---|---|
|
|
Name of the traffic control profile. (Enhanced subscriber management for MX Series routers) The name of the dynamic
traffic control profile object is associated with a generated UID (for example,
|
|
|
Index number of the traffic control profile. (Enhanced subscriber management for MX Series routers) Index values for dynamic CoS traffic control profiles are larger for enhanced subscriber management than they are for legacy subscriber management. |
|
|
(MX Series routers with ATM Multi-Rate CE MIC) Configured category of ATM service. Possible values:
|
|
|
Configured maximum burst size, in cells. |
|
|
Configured peak rate, in cps. |
|
|
Configured sustained rate, in cps. |
|
|
Configured shaping rate, in bps. Note:
(MX Series routers with ATM Multi-Rate CE MIC) Configured peak rate, in cps. |
|
|
Configured burst size for the shaping rate, in bytes. Note:
(MX Series routers with ATM Multi-Rate CE MIC) Configured maximum burst rate, in cells. |
|
|
Configured shaping rate for high-priority traffic, in bps. |
|
|
Configured shaping rate for medium-priority traffic, in bps. |
|
|
Configured shaping rate for low-priority traffic, in bps. |
|
|
Configured shaping rate for high-priority excess traffic, in bps. |
|
|
Configured shaping rate for low-priority excess traffic, in bps. |
|
|
Name of the associated scheduler map. (Enhanced subscriber management for MX Series routers) The name of the dynamic
scheduler map object is associated with a generated UID (for example,
|
|
|
Configured delay buffer rate, in bps. |
|
|
Configured excess rate, in percent or proportion. |
|
|
Configured excess rate for high priority traffic, in percent or proportion. |
|
|
Configured excess rate for low priority traffic, in percent or proportion. |
|
|
Configured guaranteed rate, in bps or cps. Note:
(MX Series routers with ATM Multi-Rate CE MIC) This value depends on the ATM service category chosen. Possible values:
|
|
|
Configured burst size for the guaranteed rate, in bytes. |
|
|
Configured minimum shaping rate for an adjusted queue, in bps. |
|
|
Configured shaping mode: |
|
|
Configured byte adjustment value. |
|
|
Configured shaping-rate adjustment for parent scheduler nodes. If enabled, this field appears.
|
Sample Output
- show class-of-service traffic-control-profile
- show class-of-service traffic-control-profile (MX Series routers with Clear Channel Multi-Rate CE MIC)
- show class-of-service traffic-control-profile (ACX Series routers with ATM IMA pseudowire interfaces)
- show class-of-service traffic-control-profile (Enhanced Subscriber Management)
show class-of-service traffic-control-profile
user@host> show class-of-service traffic-control-profile Traffic control profile: Profile1, Index: 57625 Scheduler map: m1 Delay Buffer rate: 500000 Guaranteed rate: 1000000 Overhead bytes: 20 Traffic control profile: Profile2, Index: 57624 Scheduler map: m2 Delay Buffer rate: 600000 Guaranteed rate: 2000000 Traffic control profile: Profile3, Index: 57627 Scheduler map: m3 Delay Buffer rate: 800000 Guaranteed rate: 3000000 .Excess rate high: proportion 4 Traffic control profile: Profile4, Index: 57626 Scheduler map: m4 Delay Buffer rate: 750000 Guaranteed rate: 4000000 ..adjust-minimum 20000000 Traffic control profile: foo, Index: 57626 Shaping rate: 100000000 Scheduler map: <default> Overhead accounting mode: Frame Mode Frame mode overhead accounting bytes: -12 Adjust parent: flow-aware
show class-of-service traffic-control-profile (MX Series routers with Clear Channel Multi-Rate CE MIC)
user@host> show class-of-service traffic-control-profile Traffic control profile: at-vbr1, Index: 11395 ATM Service: RTVBR Scheduler map: m3 overhead accounting mode: Frame Mode Shaping rate: 1000 cps Shaping rate burst: 500 cells Delay Buffer rate: 2000 cps Guaranteed rate: 1000 cps Traffic control profile: foo, Index: 38286 ATM Service: UBR Scheduler map: m3 overhead accounting mode: Frame Mode
show class-of-service traffic-control-profile (ACX Series routers with ATM IMA pseudowire interfaces)
user@host> show class-of-service traffic-control-profile Traffic control profile: foo, Index: 38286 ATM Service: RTVBR Shaping rate: 2000 cps Shaping rate burst: 200 cells Scheduler map: <default> Delay Buffer rate: 1000 cps Guaranteed rate: 1700 cps
show class-of-service traffic-control-profile (Enhanced Subscriber Management)
user@host> show class-of-service traffic-control-profile Traffic control profile: TC_PROF_100_199_SERIES_UID1000, Index: 4294967313 Shaping rate: 11000000 Shaping rate burst: 1 bytes Scheduler map: SMAP-1_UID1002 Delay Buffer rate: 5000000 Overhead accounting mode: Cell Mode Frame mode overhead accounting bytes: -4 Cell mode overhead accounting bytes: 20
Release Information
Command introduced before Junos OS Release 7.4.