Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

show igmp-snooping route

Syntax

Description

Display IGMP snooping route information.

Note:

This command is only available on switches that do not support the Enhanced Layer 2 Software (ELS) configuration style.

Options

none

Display general route information for all VLANs on which IGMP snooping is enabled.

brief | detail

(Optional) Display the specified level of output. The default is brief.

ethernet-switching

(Optional) Display information on Layer 2 multicast routes. This is the default.

inet

(Optional) Display information for Layer 3 multicast routes.

vlan vlan-name

(Optional) Display route information for the specified VLAN.

Required Privilege Level

view

Output Fields

Table 1 lists the output fields for the show igmp-snooping route command. Output fields are listed in the approximate order in which they appear. Some output fields are not displayed by this command on some devices.

Table 1: show igmp-snooping route Output Fields

Field Name

Field Description

Table

Routing table ID for virtual routing instances, or 0 on devices where this is not used.

Routing Table

Routing table ID for virtual routing instances.

VLAN

Name of the VLAN for which IGMP snooping is enabled.

Group

Multicast IPv4 group address.

Interface or Interfaces

Name of the interface or interfaces in the VLAN associated with the multicast group.

Next-hop

ID associated with the next-hop device.

Layer 2 next-hop

ID associated with the Layer 2 next-hop device.

Routing next-hop

ID associated with the Layer 3 next-hop device.

Sample Output

show igmp-snooping route

show igmp-snooping route vlan v1

show igmp-snooping route detail

show igmp-snooping route inet detail

Release Information

Command introduced in Junos OS Release 9.1.