show interfaces (GRE)
Syntax
show interfaces interface-type <brief | detail | extensive | terse> <descriptions> <media> <snmp-index snmp-index> <statistics>
Description
Display status information about the specified generic routing encapsulation (GRE) interface.
Options
| interface-type | On M Series and T Series routers and EX Series switches, the interface type is gr-fpc/pic/port. |
| brief | detail | extensive | terse | (Optional) Display the specified output level of interface information. |
| descriptions | (Optional) Display interface description strings. |
| media | (Optional) Display media-specific information about network interfaces. |
| snmp-index snmp-index | (Optional) Display information for the specified SNMP index of the interface. |
| statistics | (Optional) Display static interface statistics. |
You can configure generic routing encapsulation (GRE) interfaces (gre-x/y/z) only for GMPLS control channels. GRE interfaces are not supported or configurable for other applications. For more information about GMPLS, see the MPLS Applications User Guide.
Required Privilege Level
view
Output Fields
Table 1 lists the output fields for the show interfaces (GRE)
command. Output fields are listed in the approximate order in which
they appear.
Field Name |
Field Description |
Level of Output |
|---|---|---|
| Physical Interface | ||
Physical interface |
Name of the physical interface. |
All levels |
Enabled |
State of the interface. Possible values are described in the “Enabled Field” section under Common Output Fields Description. |
All levels |
Interface index |
Physical interface's index number, which reflects its initialization sequence. |
detail extensive none |
SNMP ifIndex |
SNMP index number for the physical interface. |
detail extensive none |
Generation |
Unique number for use by Juniper Networks technical support only. |
detail extensive |
Type |
Type of interface. |
All levels |
Link-level type |
Encapsulation used on the physical interface. |
All levels |
MTU |
MTU size on the physical interface. |
All levels |
Speed |
Speed at which the interface is running. |
All levels |
Hold-times |
Current interface hold-time up and hold-time down, in milliseconds. |
detail extensive |
Device Flags |
Information about the physical device. Possible values are described in the “Device Flags” section under Common Output Fields Description. |
All levels |
Interface Flags |
Information about the interface. Possible values are described in the “Interface Flags” section under Common Output Fields Description. |
All levels |
Input rate |
Input rate in bits per second (bps) and packets per second (pps). |
None specified |
Output rate |
Output rate in bps and pps. |
None specified |
Statistics last cleared |
Time when the statistics for the interface were last set to zero. |
detail extensive |
Traffic statistics |
The number of and the rate at which input and output bytes and packets are received and transmitted on the physical interface.
|
detail extensive |
| Logical Interface | ||
Logical interface |
Name of the logical interface. |
All levels |
Index |
Logical interface index number, which reflects its initialization sequence. |
detail extensive none |
SNMP ifIndex |
Logical interface SNMP interface index number. |
detail extensive none |
Generation |
Unique number for use by Juniper Networks technical support. |
detail extensive |
Flags |
Information about the logical interface. Possible values listed in the “Logical Interface Flags” section under Common Output Fields Description. describe general information about the logical interface. GRE-specific information about the logical interface is indicated by the presence or absence of the following value in this field:
|
All levels |
IP-Header |
IP header of the logical interface.
If the GRE-specific information about the logical interface is indicated by the presence or absence of the following value in this field:
|
All levels |
Encapsulation |
Encapsulation on the logical interface. |
All levels |
|
Name of the Layer 2 routing instance associated with the GRE interface. |
All levels |
|
Name of the Layer 3 routing instance associated with the GRE interface. |
All levels |
|
Status of type of service (ToS) bits in the GRE packet header:
Note:
EX Series switches do not support copying ToS bits to
the encapsulated packet, so the value of this field is always |
|
|
Indicates whether a GRE keepalive time and hold time are configured for the GRE tunnel. Note:
EX Series switches do not support configuration of GRE
tunnel keepalive times and hold times, so the value of this field
is always |
|
|
Status of the other end of the GRE tunnel: |
|
Input packets |
Number of packets received on the logical interface. |
None specified |
Output packets |
Number of packets transmitted on the logical interface. |
None specified |
Traffic statistics |
Total number of bytes and packets received and transmitted on the logical interface. These statistics are the sum of the local and transit statistics. When a burst of traffic is received, the value in the output packet rate field might briefly exceed the peak cell rate. It takes awhile (generally, less than 1 second) for this counter to stabilize.
|
detail extensive |
Local statistics |
Statistics for traffic received from and transmitted to the Routing Engine. When a burst of traffic is received, the value in the output packet rate field might briefly exceed the peak cell rate. It takes awhile (generally, less than 1 second) for this counter to stabilize. |
detail extensive |
Transit statistics |
Statistics for traffic transiting the router. When a burst of traffic is received, the value in the output packet rate field might briefly exceed the peak cell rate. It takes awhile (generally, less than 1 second) for this counter to stabilize. |
detail extensive none |
Protocol |
Protocol family configured on the logical interface, such as iso, inet6, or mpls. |
detail extensive none |
protocol-family |
Protocol family configured on the logical interface. If the protocol is inet, the IP address of the interface is also displayed. |
brief |
MTU |
MTU size on the logical interface. |
detail extensive none |
Generation |
Unique number for use by Juniper Networks technical support only. |
detail extensive |
Route table |
Routing table in which the logical interface address is located. For example, 0 refers to the routing table inet.0. |
detail extensive |
Flags |
Information about the protocol family flags. Possible values are described in the “Family Flags” section under Common Output Fields Description. |
detail extensive none |
Addresses, Flags |
Information about the address flags. Possible values are described in the “Addresses Flags” section under Common Output Fields Description. |
detail extensive none |
Destination |
IP address of the remote side of the connection. |
detail extensive none |
Local |
IP address of the logical interface. |
detail extensive none |
Broadcast |
Broadcast address of the logical interface. |
detail extensive none |
Generation |
Unique number for use by Juniper Networks technical support only. |
detail extensive |
Sample Output
- show interfaces (GRE)
- show interfaces brief (GRE)
- show interfaces detail (GRE)
- show interfaces (Layer 2 Services Over GRE Interfaces)
- show interfaces extensive (Layer 2 Services Over GRE Interfaces)
- show interfaces detail (GRE) on an EX4200 Virtual Chassis Member Switch
- show interfaces extensive (GRE)
- show interfaces gr-2/0/10 for GRE IPv6 tunnel
show interfaces (GRE)
user@host> show interfaces gr-1/2/0
Physical interface: gr-0/0/0, Enabled, Physical link is Up
Interface index: 132, SNMP ifIndex: 26
Type: GRE, Link-level type: GRE, MTU: Unlimited, Speed: 800mbps
Device flags : Present Running
Interface flags: Point-To-Point SNMP-Traps
Input rate : 0 bps (0 pps)
Output rate : 0 bps (0 pps)
Logical interface gr-0/0/0.0 (Index 68) (SNMP ifIndex 47)
Flags: Point-To-Point SNMP-Traps 16384
IP-Header 192.0.2.2:192.0.2.1:47:df:64:0000000000000000 Encapsulation: GRE-NULL
Input packets : 0
Output packets: 0
Protocol inet, MTU: 1476
Flags: None
Addresses, Flags: Is-Primary
Local: 198.51.100.1
show interfaces brief (GRE)
user@host> show interfaces gr-1/2/0 brief
Physical interface: gr-1/2/0, Enabled, Physical link is Up
Type: GRE, Link-level type: GRE, MTU: Unlimited, Speed: 800mbps
Device flags : Present Running
Interface flags: Point-To-Point SNMP-Traps
Logical interface gr-1/2/0.0
Flags: Hardware-Down Point-To-Point SNMP-Traps 0x4000
IP-Header 10.10.0.2:10.10.0.1:47:df:64:0000000000000000
Encapsulation: GRE-NULL
inet 10.100.0.1/30
mpls
show interfaces detail (GRE)
user@host> show interfaces gr-1/2/0 detail
Physical interface: gr-0/0/0, Enabled, Physical link is Up
Interface index: 132, SNMP ifIndex: 26, Generation: 13
Type: GRE, Link-level type: GRE, MTU: Unlimited, Speed: 800mbps
Hold-times : Up 0 ms, Down 0 ms
Device flags : Present Running
Interface flags: Point-To-Point SNMP-Traps
Statistics last cleared: Never
Traffic statistics:
Input bytes : 0 0 bps
Output bytes : 0 0 bps
Input packets: 0 0 pps
Output packets: 0 0 pps
Logical interface gr-0/0/0.0 (Index 68) (SNMP ifIndex 47) (Generation 8)
Flags: Point-To-Point SNMP-Traps 16384
IP-Header 192.0.2.2:192.0.2.1:47:df:64:0000000000000000 Encapsulation: GRE-NULL
Traffic statistics:
Input bytes : 0
Output bytes : 0
Input packets: 0
Output packets: 0
Local statistics:
Input bytes : 0
Output bytes : 0
Input packets: 0
Output packets: 0
Transit statistics:
Input bytes : 0 0 bps
Output bytes : 0 0 bps
Input packets: 0 0 pps
Output packets: 0 0 pps
Protocol inet, MTU: 1476, Generation: 12, Route table: 0
Flags: None
Addresses, Flags: Is-Primary
Destination: Unspecified, Local: 198.51.100.1, Broadcast: Unspecified,
Generation: 15
show interfaces (Layer 2 Services Over GRE Interfaces)
user@host> show interfaces gr-2/2/10
show interfaces gr-2/2/10
Physical interface: gr-2/2/10, Enabled, Physical link is Up
Interface index: 214, SNMP ifIndex: 690
Type: GRE, Link-level type: GRE, MTU: Unlimited, Speed: 1000mbps
Device flags : Present Running
Interface flags: Point-To-Point SNMP-Traps
Input rate : 0 bps (0 pps)
Output rate : 0 bps (0 pps)
Logical interface gr-2/2/10.0 (Index 342) (SNMP ifIndex 10834)
Flags: Up Point-To-Point SNMP-Traps 0x4000 IP-Header 203.0.113.1:203.0.113.254:47:df:64:0000000000000000 Encapsulation: GRE-NULL
L2 Routing Instance: vs1, L3 Routing Instance: default
Copy-tos-to-outer-ip-header: Off
Gre keepalives configured: Off, Gre keepalives adjacency state: down
Input packets : 2
Output packets: 0
Protocol bridge, MTU: 1476
Flags: Sendbcast-pkt-to-re
Addresses, Flags: Is-Preferred Is-Primary
Destination: 6/8, Local: 6.0.0.1, Broadcast: 6.255.255.255
show interfaces extensive (Layer 2 Services Over GRE Interfaces)
user@host> show interfaces gr-2/2/10.0 extensive
Flags: SNMP-Traps Encapsulation: ENET2
L2 Routing Instance: vs1, L3 Routing Instance: default
Traffic statistics:
Input bytes : 58851250
Output bytes : 0
Input packets: 1279375
Output packets: 0
Local statistics:
Input bytes : 0
Output bytes : 0
Input packets: 0
Output packets: 0
Transit statistics:
Input bytes : 58851250 75136 bps
Output bytes : 0 0 bps
Input packets: 1279375 204 pps
Output packets: 0 0 pps
Protocol bridge, MTU: 1476, Generation: 175, Route table: 7
Flags: Access-Mode
show interfaces detail (GRE) on an EX4200 Virtual Chassis Member Switch
user@host> show interfaces gr-2/0/15 detail
Physical interface: gr-2/0/15, Enabled, Physical link is Up
Interface index: 195, SNMP ifIndex: 846, Generation: 198
Type: GRE, Link-level type: GRE, MTU: Unlimited, Speed: 1000mbps
Hold-times : Up 0 ms, Down 0 ms
Current address: 00:00:5e:00:53:d2, Hardware address: 00:00:5e:00:53:d2
Device flags : Present Running
Interface flags: Point-To-Point SNMP-Traps
Statistics last cleared: 2011-09-14 17:43:15 UTC (00:00:18 ago)
Traffic statistics:
Input bytes : 5600636 0 bps
Output bytes : 5600636 0 bps
Input packets: 20007 0 pps
Output packets: 20007 0 pps
IPv6 transit statistics:
Input bytes : 0
Output bytes : 0
Input packets: 0
Output packets: 0
Logical interface gr-2/0/15.0 (Index 75) (SNMP ifIndex 847) (HW Token 4093)
(Generation 140)
Flags: Point-To-Point SNMP-Traps 0x0
IP-Header 192.168.30.2:192.168.20.3:47:df:64:0000000000000000
Encapsulation: GRE-NULL
Copy-tos-to-outer-ip-header: Off
Gre keepalives configured: Off, Gre keepalives adjacency state: down
Traffic statistics:
Input bytes : 5600886
Output bytes : 2881784
Input packets: 20010
Output packets: 10018
Local statistics:
Input bytes : 398
Output bytes : 264
Input packets: 5
Output packets: 3
Transit statistics:
Input bytes : 5600488 0 bps
Output bytes : 2881520 0 bps
Input packets: 20005 0 pps
Output packets: 10015 0 pps
Protocol inet, Generation: 159, Route table: 0
Flags: None
Addresses, Flags: Is-Preferred Is-Primary
Destination: 10.10.10/8, Local: 10.10.10.10, Broadcast: 10.10.10.255,
Generation: 144
Logical interface gr-2/0/15.1 (Index 80) (SNMP ifIndex 848) (HW Token 4088)
(Generation 150)
Flags: Point-To-Point SNMP-Traps 0x0
IP-Header 192.168.40.2:192.168.30.1:47:df:64:0000000000000000
Encapsulation: GRE-NULL
Copy-tos-to-outer-ip-header: Off
Gre keepalives configured: Off, Gre keepalives adjacency state: down
Traffic statistics:
Input bytes : 260
Output bytes : 2880148
Input packets: 4
Output packets: 10002
Local statistics:
Input bytes : 112
Output bytes : 0
Input packets: 2
Output packets: 0
Transit statistics:
Input bytes : 148 0 bps
Output bytes : 2880148 0 bps
Input packets: 2 0 pps
Output packets: 10002 0 pps
Protocol inet, Generation: 171, Route table: 0
Flags: None
Addresses, Flags: Is-Preferred Is-Primary
Destination: 10.10.10/8, Local: 10.10.10.10, Broadcast: 10.10.10.255,
Generation: 160
show interfaces extensive (GRE)
The output for the show interfaces extensive command
is identical to that for the show interfaces detail command.
For sample output, see show interfaces detail (GRE) and show interfaces detail (GRE) on an EX4200 Virtual Chassis Member
Switch.
show interfaces gr-2/0/10 for GRE IPv6 tunnel
user@host> show interfaces gr-2/0/10
show interfaces gr-2/0/10
Physical interface: gr-2/0/10, Enabled, Physical link is Up
Interface index: 140, SNMP ifIndex: 559
Type: GRE, Link-level type: GRE, MTU: Unlimited, Speed: 1000mbps
Device flags : Present Running
Interface flags: Point-To-Point SNMP-Traps
Input rate : 4952 bps (3 pps)
Output rate : 200 bps (0 pps)
Logical interface gr-2/0/10.0 (Index 355) (SNMP ifIndex 857)
Flags: Up Point-To-Point SNMP-Traps 0x4000 IP-Header 1000::11:0:11:1-1000::11:2:13:2-47-64-0-0-0000000000000000 Encapsulation: GRE-NULL
Copy-tos-to-outer-ip-header: Off, Copy-tos-to-outer-ip-header-transit: Off
Gre keepalives configured: Off, Gre keepalives adjacency state: down
Input packets : 60
Output packets: 83
Protocol inet, MTU: 9082
Max nh cache: 0, New hold nh limit: 0, Curr nh cnt: 0, Curr new hold cnt: 0, NH drop cnt: 0
Flags: Sendbcast-pkt-to-re
Addresses, Flags: Is-Preferred Is-Primary
Destination: 14.0.13/24, Local: 14.0.13.1, Broadcast: 14.0.13.255
Protocol iso, MTU: 9082
Protocol inet6, MTU: 9082
Max nh cache: 0, New hold nh limit: 0, Curr nh cnt: 0, Curr new hold cnt: 0, NH drop cnt: 0
Addresses, Flags: Is-Preferred Is-Primary
Destination: 1400::14:0:13:0/120, Local: 1400::14:0:13:1
Addresses, Flags: Is-Preferred
Destination: fe80::/64, Local: fe80::2a0:a520:2875:4992
Protocol mpls, MTU: 9070, Maximum labels: 3
Flags: Is-Primary
Release Information
Command introduced before Junos OS Release 7.4.
Command introduced before Junos OS Release 17.3R1.