show mac-rewrite interface

Syntax

Display Layer 2 protocol tunneling (L2PT) information.

Note:

The implementation of L2PT over VXLAN tunnels for EVPN-VXLAN networks doesn't do MAC rewrite operations for the protocol frame tunneling. To verify operation when you enable L2PT over VXLAN, use the show l2pt interface command instead of this command. See Layer 2 Protocol Tunneling over VXLAN Tunnels in EVPN-VXLAN Bridged Overlay Networks for details.

brief \| detail	(Optional) Display the specified level of output.
interface `interface-name`	(Optional) Display L2PT information for the specified interface.

view

Table 1 lists the output fields for the show mac-rewrite interface command. Output fields are listed in the approximate order in which they appear.

Table 1: show mac-rewrite interface Output Fields
Field Name	Field Description	Level of Output
Interface	Name of the interface on which L2PT is configured.	brief detail
Tunnel destination MAC address	Name of the configured Layer 2 multicast MAC address.	briefdetail
Protocols	Layer 2 protocols being tunneled on this interface. All devices that support L2PT can tunnel the following protocols: Cisco Discovery Protocol (CDP), Spanning Tree Protocol (STP), or VLAN Trunk Protocol (VTP). The following Layer 2 protocols can also be tunneled on some devices that support L2PT: E-LMI, GVRP, IEEE 802.1X, IEEE 802.3AH, LACP, LLDP, MMRP, MVRP, PVSTP+, UDLD, or VSTP. See protocol for more information on the supported protocols for tunneling on different devices.	brief detail

Command introduced in Junos OS Release 9.1.

Command introduced in Junos OS Release 14.1X53-D10 and 17.3R1 for EX4300 switches.

Command introduced in Junos OS Release 15.1X53-D55 and 18.2R1 for EX2300 and EX3400 switches.