show security flow gate destination-port

Syntax

Description

Display information about temporary openings known as pinholes or gates in the security firewall that for the specified destination port.

Note:

Destination port filter matches the gate only if the given port falls within the range of ports specified in the gate.

Options

destination-port-number—Number of the destination port for which to display gate information.

Range: 1 through 65,535
brief | summary—Display the specified level of output.

Required Privilege Level

view

Output Fields

Table 1 lists the output fields for the show security flow gate destination-port command. Output fields are listed in the approximate order in which they appear.

Table 1: show security flow gate destination-port Output Fields
Field Name	Field Description
Hole	Range of flows permitted by the pinhole.
Translated	Tuples used to create the session if it matches the pinhole. Source address and port Destination address and port
Protocol	Application protocol, such as UDP or TCP.
Application	Name of the application.
Age	Idle timeout for the pinhole.
Flags	Internal debug flags for the pinhole.
Zone	Incoming zone.
Reference count	Number of resource manager references to the pinhole.
Resource	Resource manager information about the pinhole.
Valid gates	Number of valid gates.
Pending gates	Number of pending gates.
Invalidated gates	Number of invalid gates.
Gates in other states	Number of gates in other states.
Total gates	Number of gates in total.
Maximum gates	Number of maximum gates.

Sample Output

show security flow gate destination-port brief
show security flow gate destination-port summary

show security flow gate destination-port brief

show security flow gate destination-port summary

Release Information

Command introduced in Junos OS Release 10.2.

ON THIS PAGE