show uplink-failure-detection
Syntax
show uplink-failure-detection <group group-name>
Description
Display information about the uplink-failure-detection group, the member interfaces, and their status.
Options
| none | Display information about all groups configured for uplink failure detection. |
| group group-name | (Optional) Display information about the specified group only. |
Required Privilege Level
view
Output Fields
Table 1 lists the output fields for the show uplink-failure-detection command. Output fields are listed in the approximate order in which
they appear.
Field Name |
Field Description |
|---|---|
Group |
Name of the group. |
Uplink |
The uplink interface or interfaces configured as link-to-monitor. Note:
The asterisk (*) indicates that the link is up. |
Downlink |
The downlink interface or interfaces configured as link-to-disable. Note:
The asterisk (*) indicates that the link is up. |
Failure Action |
Status of uplink failure detection:
|
Debounce Interval |
The amount of time, in seconds, that elapses before the downlink interfaces are brought up after a state change of the uplink interfaces. |
Sample Output
show uplink-failure-detection
user@switch> show uplink-failure-detection Group : group1 Uplink : ge-0/0/0* Downlink : ge-0/0/1* Failure Action : Inactive Group : group2 Uplink : ge-0/0/3.0 Downlink : ge-0/0/4.0 Failure Action : Active Debounce Interval : 20
Sample Output
show uplink-failure-detection group g2
user@switch> show uplink-failure-detection group g2 Group : group1 Uplink : ge-0/0/0* Downlink : ge-0/0/1* Failure Action : Inactive Group : group2 Uplink : ge-0/0/3.0 Downlink : ge-0/0/4.0 Failure Action : Active Debounce Interval : 20
Release Information
Command introduced in Junos OS Release 11.1.