adjacency-loss-hold-time (ANCP)
Syntax
adjacency-loss-hold-time seconds;
Description
Configure the ANCP agent to monitor, either globally or for a specified neighbor, how long an ANCP adjacency is down and to trigger a state change for the subscriber access line if the hold timer expires before the adjacency comes back up, as indicated by a Port Up message on the access line. By default, there is no delay between detecting an adjacency loss and triggering the state change.
Options
| seconds | Duration of period that the ANCP agent monitors loss of adjacency. |
Default: 0 seconds
Range: 0 through 1800 seconds
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 16.1R4.