vxlan-gbp-l2-profile

Syntax

Hierarchy Level

Description

Enable vxlan-gbp-l2-profile on the tunnel termination endpoint in your EVPN-VXLAN deployment to support group-based policies. This setting tells the switch to allocate a share of its resources for L2/L3 group-based policies, whereas otherwise the resources would remain committed for use by all other flows.

The vxlan-gbp-l2-profile is suitable when running an edge device in a virtualized network comprised of multiple virtual-severs and VMs. You can also use this profile for direct reachability if the edge device needs more space in the mac-table.

Note that for switches in a virtual chassis, the device must be rebooted for this setting to apply; for stand-alone switches the packet forwarding engine (PFE) restarts.

Table 1 shows the maximum GBP supported configuration with 1K unique tags.

Note:

The vxlan-gbp-l2-profile is not applicable for the EX4100 switches.

Table 1: GBP Scales for the vxlan-gbp-l2-profile

Tag Assignment	Maximum GBP Supported Configuration (EX4100 Series)	Maximum GBP Supported Configuration (EX4400 Series)	Maximum GBP Supported Configuration (EX4650 Series and QFX5120 Series)
MAC	NA	32K	96K
IP	NA	20K	26K
Port	NA	2K	2K
VLAN	NA	3K	3K
Port + VLAN	NA	3K	3K

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

Release Information

Statement introduced in Junos OS Release 23.2R1 for supported EX4400, EX4650, and QFX5120 Series switches.