dynamic-requests
Syntax
dynamic-requests {
routing-instance routing-instance-name;
source-address source-address;
source-port source-port;
}
Hierarchy Level
[edit access radsec destination ]
Description
Configure RADSEC clients to receive and process dynamic requests. RADSEC servers can be a source of dynamic RADIUS requests such as Change of Authorization (CoA) and RADIUS-initiated disconnect (RID) messages.
You must configure the IP address of the RADSEC server as the source address for the requests. You can also specify the source port that the client monitors for dynamic requests. If the port is not explicitly configured, the default RADSEC port 2083 is used.
Options
| routing-instance routing-instance-name | Specify the routing instance name. |
| source-address ip-address | (Required) Configure the source IP address, which is the IP address of the RADSEC server. If the source address is not configured, dynamic requests will be rejected. |
| source-port port-number | (Optional) Specify the source port that the client monitors for dynamic requests. If the port is not explicitly configured, the default is used.
|
Required Privilege Level
access—To view this statement in the configuration.
access-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 19.2R1.