inet (interfaces (QFX Series))
Syntax
inet {
address address {
primary;
filter input filter-name;
filter output filter-name;
targeted-broadcast;
}
}
Hierarchy Level
[edit interfaces interface-name unit logical-unit-number family], [edit interfaces interface-range interface-name unit logical-unit-number family]
Description
Configure the primary IP address for the logical interface.
Junos will no longer accept duplicate IPs between different logical interfaces in the same routing instance. It is applicable to both inet and inet6. The below table lists the duplicate addresses found between different interfaces.
|
Point to Point |
Management Interfaces |
Non-point to point |
With same APS |
With no or diff APS |
LSQ or PSEUDO RLSQ interfaces (fail options) |
LSQ or PSEUDO_RLSQ interfaces (fail options) |
|
|---|---|---|---|---|---|---|---|
|
Point to Point |
Commit accepted |
Error displayed |
Error displayed |
Error displayed |
Error displayed |
Commit accepted |
Commit accepted |
|
Management Interfaces |
Error displayed |
Error displayed |
Error displayed |
Error displayed |
Error displayed |
Error displayed |
Error displayed |
|
Non-point to point |
Error displayed |
Error displayed |
Error displayed |
Error displayed |
Error displayed |
Error displayed |
Error displayed |
|
With same APS |
Error displayed |
Error displayed |
Error displayed |
Commit accepted |
Error displayed |
Error displayed |
Error displayed |
|
With no or diff APS |
Error displayed |
Error displayed |
Error displayed |
Error displayed |
Error displayed |
Error displayed |
Error displayed |
|
LSQ or PSEUDO_RLSQ interfaces (fail options) |
Commit accepted |
Error displayed |
Error displayed |
Error displayed |
Error displayed |
Commit accepted |
Commit accepted |
|
LSQ or PSEUDO_RLSQ interfaces (no fail options) |
Commit accepted |
Error displayed |
Error displayed |
Error displayed |
Error displayed |
Commit accepted |
Error displayed |
APS configuration is applicable to Sonet (SO) and derivatives of Atm (AT) interfaces only.
Default
You must configure a logical interface to be able to use the physical device.
Options
The remaining statements are explained separately. See CLI Explorer.
Required Privilege Level
interface—To view this statement in the configuration.interface-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 11.1.