ingress-shaping-overhead
Syntax
ingress-shaping-overhead number;
Hierarchy Level
[edit chassis fpc slot-number pic pic-number traffic-manager], [edit chassis lcc number fpc slot-number pic pic-number traffic-manager]
Description
Number of bytes to add to packet to determine shaped session packet length.
Although the ingress queuing filter can be used with EX9200 switches and MX-Series routers, it is used only on those MX Series routers that have MPCs. An error is generated at commit if the ingress queuing filter is applied to an interface on any other type of port concentrator.
Options
number—When L2TP session
shaping is configured, the number of CoS shaping overhead bytes to
add to the packets on the ingress side of the L2TP tunnel to determine
the shaped session packet length.
When session shaping is not configured and traffic management (queuing and scheduling) is configured on the ingress side, the number of CoS shaping overhead bytes to add to the packets on the ingress interface.
Range: –63 through 192
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 8.3.