inner-vlan-id-swap-ranges
Syntax
inner-vlan-id-swap-ranges low-inner-tag–high-inner-tag;
Hierarchy Level
[edit interfaces interface-name unit logical-unit-number]
Description
Define core-facing VLAN ID ranges from which an inner VLAN ID tag can be allocated to replace the outer VLAN tag that was appended by the access node on the upstream packets to the BNG in a Layer 2 wholesale network. The tag swap occurs before the subscriber traffic is forwarded to the network service provider (NSP). You can configure up to 32 non-overlapping inner VLAN ID ranges per core-facing physical interface for VLAN-OOB subscribers.
You can add or remove ranges or increase or decrease the size of existing ranges even while Layer 2 wholesale sessions are assigned to the core-facing interface associated with the ranges. You cannot remove a range from which a VLAN ID has already been allocated. You cannot reduce a range if the new range excludes a VLAN ID that has already been allocated.
Options
| low-inner-tag | Inner (core-facing) VLAN ID tag representing the lower limit of the swap range.
|
| high-inner-tag | Inner (core-facing) VLAN ID tag representing the upper limit of the swap range.
|
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 17.2R1.