Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
ON THIS PAGE
 

ir-mode

Syntax

Hierarchy Level

Description

Configure the license mode of the specified enhanced MPC in an MPC slot as IR or R. Setting the license mode enables you to distinguish between an MPC with an IR license and an MPC with an R license after the MPC is installed on the router.

Note:

The license mode settings are used only to provide information. You cannot set or alter the license of the MPC when you configure the mode.

Default

The default IR mode is Base. You do not set this configuration statement if Base is the mode of your license. Base mode includes the following features:

  • All Layer 2, Layer 2.5, and Layer 3 features.

  • Up to 32 Layer 3 routing instances of the virtual routing and forwarding (VRF) instance type.

  • Up to 2 million routes in the forwarding information base (FIB), provided there is hardware support. (FIB is also known as forwarding table.)

  • Up to 6 million routes in the routing information base (RIB), also known as routing table.

Options

IR

Configure the license mode IR for an MPC installed in a specified MPC slot. Includes the following features:

  • All Layer 2, Layer 2.5, and Layer 3 features.

  • Up to 32 Layer 3 routing instances of the virtual routing and forwarding (VRF) instance type.

R

Configure the license mode R for an MPC installed in a specified MPC slot. Includes full-scale Layer 2, Layer 2.5, and Layer 3 features. Scale is determined by the hardware capabilities.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

Release Information

Statement introduced in Junos OS Release 14.2.

Related Documentation