pic (Port)
Syntax
pic pic-number {
fte {
(port port-number | port-range port-range-low port-range-high);
}
xe {
(port port-number | port-range port-range-low port-range-high);
}
}
Hierarchy Level
[edit chassis interconnect-device name fpc slot]
Description
(QFX3600 Node device only) Configure port types on QFX3600 Node devices.
The Packet Forwarding Engine on the QFX3600 Node device is restarted when you commit the port type configuration changes. As a result, you might experience packet loss on the Node device.
Options
| pic pic-number | Number of the physical interface card (PIC) on which you want to configure port types. Specify 0 to configure xe (10-Gigabit Ethernet) type ports. Specify 1 to configure fte (40-gigabit data plane uplink) type ports. |
| fte | Configure a specific port or a range of ports to operate as 40-gigabit data plane uplink ports. |
| xe | Configure a specific port or a range of ports to operate as four 10-Gigabit Ethernet ports. |
| port-number | Port number on which you want to configure the port
type. Valid values are 0 through 7 if the port type is |
| port-range-low | Lowest-numbered port in the range of ports. The lowest
possible value is 0 if the port type is |
| port-range-high | Highest-numbered port in the range of ports. The highest
possible value is 7 if the port type is |
By default, ports Q0 through Q3 operate as fte type ports, and ports Q4 through Q15 operate as xe type ports.
Only ports Q0 through Q7 can be configured as fte type ports.
Only ports Q2 through Q15 can be configured as xe type ports.
When you delete the port type configuration for an individual port or a block of ports, the ports return to operating in their default port type.
Required Privilege Level
routing—To view this statement in the configuration.routing-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 12.2.