pppoe (System Processes)
Syntax
pppoe {
command binary-file-path;
disable;
failover (alternate-media | other-routing-engine);
}
Hierarchy Level
[edit system processes]
Description
Enable users to connect to a network of hosts over a bridge or access concentrator.
Options
command binary-file-path—Path to the binary process.disable—Disable the Point-to-Point Protocol over Ethernet process.failover—Configure the device to reboot if the software process fails four times within 30 seconds, and specify the software to use during the reboot.alternate-media—Configure the device to switch to backup media that contains a version of the system if a software process fails repeatedly.other-routing-engine—Instruct the secondary Routing Engine to take primary role if a software process fails. If this statement is configured for a process, and that process fails four times within 30 seconds, then the device reboots from the secondary Routing Engine.
Required Privilege Level
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 9.2.