refresh (Commit Scripts)
Syntax
refresh;
Description
Overwrite the local copy of all enabled commit scripts or a single
enabled commit script with the copy located at the source URL, as
specified in the source statement at the same
hierarchy level. If the load-scripts-from-flash
statement is configured, the device refreshes the scripts on the
flash drive instead of the hard disk.
The update operation occurs as soon as you issue the set
refresh configuration mode command. Issuing the
set refresh command does not add the
refresh statement to the configuration.
Thus the command behaves like an operational mode command by
executing an operation, instead of adding a statement to the
configuration.
Before you refresh a local script from an HTTPS server, you must first
configure the cert-file statement for that script
in supported releases. Specify the absolute path to the certificate
(Root CA or self-signed) that the device will use to validate the
server's certificate during the refresh operation.
On the QFabric system, commit scripts are stored in the /pbdata/mgd_shared/partition-ip/var/db/scripts/commit/ directory on the Director device.
As of Junos OS Release 18.1R1, you can specify which routing instance the update is done through. To specify the routing instance to use for updating commit scripts, configure the routing instance in two places in the CLI:
user@host# set system routing-instances routing-instance-name description description user@host# set system scripts commit file filename routing-instance routing-instance-name
If you enable the non-default management instance and use
mgmt_junos for
routing-instance-name,
you can configure scripts to update using the dedicated management
instance mgmt_junos.
Required Privilege Level
maintenance—To execute this statement in configuration mode.
Release Information
Statement introduced in Junos OS Release 7.4.