rejoin-timeout (Aggregated Multiservices)
Syntax
rejoin-timeout rejoin-timeout;
Hierarchy Level
[edit interfaces interface-name load-balancing-options member-failure-options drop-member-traffic]
Description
Configure the time by when failed members (members
in the DISCARD state) should rejoin
the aggregated Multiservices (AMS) interface automatically. All members
that do not rejoin by the configured time are moved to the INACTIVE state and the traffic meant for each of
the members is dropped.
If multiple members fail around the same time, then they are
held in the DISCARD state using a single
timer. When the timer expires, all the failed members move to INACTIVE state at the same time.
Default
If you do not configure a value, the default value of 120 seconds is used.
Options
rejoin-timeout—Time, in seconds, by which a failed member must rejoin.
Default: 120 seconds
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 11.4.
Support added in Junos OS Release 19.3R2 for Next Gen Services on MX Series routers MX240, MX480 and MX960 with the MX-SPC3 services card.