routing-instance (Syslog)
Syntax
routing-instance routing-instance-name;
Description
Configure the routing instance name for the routing
instance that you want the syslog client to use. If you want to use
the reserved non-default management routing instance mgmt_junos, make
sure you configure the management-instance statement.
You must also define the routing instance you want to
use under the [edit routing-instances] hierarchy level.
Starting in Junos OS Evolved Release 20.1R1 and 19.4R2, if you
are sending syslog messages to a remote host that is identified by
its IP address at the [edit system syslog host ip-address] hierarchy, you only need to configure the management-instance statement to use the mgmt_junos routing instance. You do not need
to configure the mgmt_junos routing instance at the [edit system
syslog host ip-address routing-instance] hierarchy.
Required Privilege Level
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 18.4R1.