send-dyn-subscription-indicator (PCRF Partition)
Syntax
send-dyn-subscription-indicator;
Description
Include the Juniper-Network-Family-Indicator AVP into its message requests. To enable the Policy Control and Charging Rules Function (PCRF) to dynamically pass subscription-ID parameters, and support a variety of authentication, authorization, and provisioning configuration, the Juniper attribute-value pairs (AVPs) in Table 1 have been allocated from the Juniper Vendor-ID space (2636) vendor-specific attribute (VSA).
If no dynamic-subscription ID is received, then neither Online Charging System (OCS) or Offline Charging System (OFCS) communications is initiated.
AVP Name |
Vendor-ID |
AVP Type |
Diameter Type |
Diameter Flag |
|---|---|---|---|---|
Juniper-Dyn-Subscription-Indicator |
2636 |
10001 |
Enum |
V |
Juniper-Dyn-Subscription-Id |
2636 |
10002 |
Grouped |
VM |
Juniper-Dyn-Subscription-Id-Type |
2636 |
10003 |
Integer32 |
VM |
Juniper-Dyn-Subscription-Id-Data |
2636 |
10004 |
UTF8String |
VM |
The client system (router) sends the Juniper-Dyn-Subscription-Id-Indicator AVP to indicate support of the dynamic assignment of the subscription ID. The Juniper-Dyn-Subscription-Id-Indicator attribute has two values:
DYN_SUBSCRIPTION_NOT_SUPPORTED (0)
DYN_SUBSCRIPTION_SUPPORTED (1)
The server then sends the Juniper-Dyn-Subscription-Id AVP to the client that indicated support. This is a grouped AVP that contains the values to be sent as Subscription-Id-Type and Subscription-Id-Data.
Required Privilege Level
admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 16.2.