service-tracking (Network Isolation Groups)
Syntax
service-tracking {
core-isolation;
}Hierarchy Level
[edit protocols network-isolation group name detection]
Description
Enable service tracking in a network isolation group to detect core isolation condition changes.
When you set this option, you must also do the following:
-
In the same network isolation group definition, configure the actions the device should take upon detecting a core isolation condition.
To do this, configure the
service-tracking-actionstatement at the[edit protocols network-isolation group name detection]hierarchy. -
Assign the network isolation group to the interface or interfaces on which the device should take action upon detecting a core isolation condition.
To do this, configure the
network-isolation-profile group group-namestatement at the[edit interfaces interface-name]hierarchy.
The interface to which you assign these parameters can be:
-
A logical single link or aggregated Ethernet (AE) link bundle (LAG) to a single-homed customer edge device in the network.
-
An Ethernet segment identifier (ESI) LAG interface to a multihomed customer edge device in the network.
-
A physical interface.
Options
| core-isolation |
Enable service tracking for EVPN core isolation conditions. |
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS and Junos OS Evolved Release 23.2R1.