skip-arp-iteration (RFC 2544 Benchmarking)
Syntax
skip-arp-iteration;
Junos OS Hierarchy Level
[edit services rpm rfc2544-benchmarkingtests test-name test-name]
Junos OS Evolved Hierarchy Level
[edit services monitoring rfc2544 tests test-name test-name]
Description
Disable the Address Resolution Protocol (ARP) test iteration for IPv4 or inet
services during a benchmarking test. This parameter is valid only for an
inet family. An ARP test iteration is a 3-second iteration that
is run for all inet tests. The results of this iteration are
disregarded in the test result calculations. The ARP test iteration is performed by
sending test frames for 3 seconds to ensure that all devices on the path to the
destination add ARP entries in the cache of the corresponding devices.
This
parameter is not applicable for CCC and bridge families.
Required Privilege Level
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 12.3X53.
Statement introduced in Junos OS Evolved Release 23.4R1.