te-class-matrix
Syntax
te-class-matrix { tenumber { priority priority; traffic-class { ctnumber priority priority; } } }
Hierarchy Level
[edit logical-systems logical-system-name protocols mpls diffserv-te], [edit protocols mpls diffserv-te]
Description
Specify the traffic engineering class matrix for a multiclass LSP or a DiffServ-aware traffic engineering LSP.
Default
The default traffic engineering class matrix is:
te-class-matrix { te0 traffic-class ct0 priority 7; te1 traffic-class ct1 priority 7; te2 traffic-class ct2 priority 7; te3 traffic-class ct3 priority 7; te4 traffic-class ct0 priority 0; te5 traffic-class ct1 priority 0; te6 traffic-class ct2 priority 0; te7 traffic-class ct3 priority 0; }
If you define any of the traffic engineering classes, all the default values are dropped.
Options
ctnumber
—Specify
the number of the class type. It can be one of four values: ct0
, ct1
, ct2
, or ct3
.
priority priority
—Specify
the priority of the class type. It can be one of eight values from
0 through 7.
tenumber
—Specify the number
of the traffic engineering class. It can be one of eight values: te0
, te1
, te2
, te3
, te4
, te5
, te6
, or te7
. You must configure
the traffic engineering classes in order, starting with te0
.
traffic-class
—Specify the traffic class for
the traffic engineering class.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Release Information
Statement introduced before Junos OS Release 7.4.