traffic-class (delay)
Syntax
traffic-class tc-value {
average-sample-size sample size;
padding-size size;
query-interval milliseconds;
rtt-delay-threshold rtt threshold value;
twcd-delay-threshold twcd threshold value;
}
Hierarchy Level
[edit protocols mpls oam performance-monitoring querier delay], [edit protocols mpls label-switched-path lsp-name oam performance-monitoring querier delay], [edit protocols mpls label-switched-path lsp-name primary path-name oam performance-monitoring querier delay], [edit protocols mpls label-switched-path lsp-name secondary path-name oam performance-monitoring querier delay]
Description
Configure traffic class specific options.
Specify the traffic classes for which loss measurement has to be performed. This parameter takes one of the tc-all|tc-0|tc-1|tc-2|tc-3|tc-4|tc-5|tc-6|tc-7|tc-none traffic-class values. For each traffic class, you can configure the respective parameters.
To enable traffic-class parameters, configure the traffic-class-statistics configuration statement under the [edit protocol mpls statistic] hierarchy level.
Options
| average-sample-size sample size | (Optional) Specify the number of samples used for calculating the average of various metrics. |
Default: 5
Range: 1 through 30
| padding-size size | (Optional) Specify the delay-measurement message length, which is used to calculate the delay experienced by messages of different sizes. |
Default: 0
Range: 1 through 1500
| query-interval milliseconds | Specify the minimum transmit interval, which signifies how often the loss measurement message is generated from the querier. |
Default: 10 seconds
Range: 1000 through 4294967295 milliseconds
| rtt-delay-threshold rtt threshold value | Specify the round-trip delay threshold value. |
Range: 1 through 4294967295 microseconds
| twcd-delay-threshold twcd threshold value | Specify the two-way channel delay threshold value. |
Range: 1 through 4294967295 microseconds
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 15.1.