unicast-ethernet

Syntax

Configure unicast Ethernet parameters for a flow specification used in internal fabric monitoring.

destination-mac `destination-mac-address`	(Optional) MAC address of the destination fabric maintenance endpoint (FMEP) that is configured in the flow specification.
destination-mac-mask `destination-mac-mask`	(Optional) MAC address range mask for the destination FMEP that is configured in the flow specification. You cannot configure the `destination-mac-mask` parameter unless you also configure the `destination-mac` parameter. The masked bits denote the range that needs to be generated. The other bits obtain their values from the corresponding source or destination MAC address parameter. The mask must be contiguous. Values: Maximum of 6 contiguous masked bits, or a mask range of 64
ethertype `ethertype`	Valid Ethernet type other than the IPv4 Ethertype. Values: 2 bytes in decimal or hexadecimal notation
source-mac `source-mac-address`	(Optional) MAC address of the source FMEP or interface that is configured in the flow specification.
source-mac-mask `source-mac-mask`	(Optional) MAC address range mask for the source FMEP that is configured in the flow specification. You cannot configure the `source-mac-mask` parameter unless you also configure the `source-mac` parameter. The masked bits denote the range that needs to be generated. The other bits obtain their values from the corresponding source or destination MAC address parameter. The mask must be contiguous. Values: Maximum of 6 contiguous masked bits, or a mask range of 64

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

Statement introduced in Junos OS Release 12.2.