Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

header-navigation
keyboard_arrow_up
close
keyboard_arrow_left
Junos CLI Reference
Table of Contents Expand all
list Table of Contents
file_download PDF
{ "lLangCode": "en", "lName": "English", "lCountryCode": "us", "transcode": "en_US" }
English
keyboard_arrow_right

vmhost management-if speed

date_range 20-Nov-23

Syntax

content_copy zoom_out_map
vmhost management-if speed { automatic | 10m | 100m | 1g }

Hierarchy Level

content_copy zoom_out_map
[edit vmhost]

Description

Configure the link speed of the host interface eth0, which serves as the management port. If you set the link speed as 10m or 100m, autonegotiation is turned off and the link speed is the speed that you specify.

Default

The link partners auto-negotiate the speed and duplex link mode and select the highest common capability.

Options

automatic

Autonegotiate the link speed of the management interface. If you set the link speed as automatic, speed and link mode are auto-negotiated with the link partner.

10m

Set the link speed of the management interface to 10Mbps.

100m

Set the link speed of the management interface to 100Mbps

1g

Set the link speed of the management interface to 1Gbps. If you set link speed to 1Gbps, autonegotiation is enabled. However, the interface advertises only 1Gbps speed and full-duplex mode.

Required Privilege Level

system—To view this statement in the configuration.

system-control—To add this statement to the configuration.

Release Information

Statement introduced in Junos OS Release 15.1F6.

Note:

The command is supported on the routers with RE-MX-X6, RE-MX-X8, and RE-PTX-X8 Routing Engines only.

footer-navigation