watchdog (PSM)

Syntax

Hierarchy Level

Description

Enable the power supply module (PSM) watchdog feature. Generally, Junos detects the thermal event health events and takes the required action as per user configuration. However, if a thermal health event causes Junos to go down, the PSM watchdog feature detects it and shuts down the router.

Note:

The PSM watchdog feature works only if all the online PSMs in the router support the feature.

Options

timeout value

Specify the watchdog timer in seconds. After the specified duration, the watchdog expires.

Range: 600 through 900 seconds
Default: 900 seconds

pat-frequency value

Specify the frequency (in minutes) at which the software resets the watchdog counter. If the watchdog counter doesn’t get reset because of reasons such as Routing Engine crash and system reboot, on watchdog timer expiry, the PSM turns off the output power.

Range: 1 through 3 minutes
Default: 1 minute

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

Platform-Specific Watchdog Behavior

Use Feature Explorer to confirm platform, and release support for specific features.

Use the following table to review platform-specific behaviors for your platform:

Table 1:
Platform	Difference
QFX10K devices	Please note that PEM firmware upgrade is required for the PSM watchdog feature. When you configure the watchdog feature on a PSM with outdated firmware, the system will raise a `Watchdog Not Supported` alarm.

Release Information

Statement introduced in Junos OS Release 20.1R1.

ON THIS PAGE