Software release
|
Junos OS releases 14.1R4, 14.2R3 and Junos Continuity,
Junos OS release 15.1 and later.
Refer to MIC/MPC Compatibility for information about which MICs are supported on this MPC.
Refer to the JTAC Knowledgebase article https://kb.juniper.net/KB21476 for recommended software releases.
|
Description
|
80 Gbps capacity with hierarchical quality of service
(HQoS)
Requires high-capacity fan trays and high capacity filter
trays
Weight: 15.96 lb (7.26 kg)
Model number: MPC2E-3D-NG-Q
Name in the CLI: MPC2E NG HQoS
Note: MPC2E-3D-NG-Q is not compatible with SCB, you must use
either SCBE-MX or SCBE2-MX for the switch fabric interface.
|
Hardware features
|
Line-rate throughput of up to 80 Gbps
Supports up to 512,000 queues per slot
Supports WAN-PHY mode at 9.95 Gbps and LAN-PHY
mode at 10.31 Gbps
Two slots for MICs
Junos Trio chipsets for increased scaling for bandwidth,
subscribers, and services.
Note: The MPC2E-3D-NG-Q has only one lookup chip (LU).
Note: MPC2E-3D-NG-Q does not support MIC3-3D-10XGE-SFPP, MIC3-3D-1X100GE-CFP,
MIC3-3D-1X100GE-CXP, and MIC3-3D-2X40GE-QSFPP.
|
Software features
|
Chained composite next hops
Layer 3 VPN localization
Detection of Layer 2 loops
Entropy label support in mixed mode
SNMP and CLI support for Routing Engine memory monitoring
BFD support for inline MLPPP/MLFR
Mixed Mode LAG support on core interfaces
Dynamic power management for MICs
See Protocols and Applications Supported
by the MX240, MX480, MX960, MX2010, and MX2020 MPC2E for
information about the protocols and applications that this MPC supports.
|
Power requirement
|
Maximum with highest-power MICs at 55° C: 11.02 A
@ 48 V (529 W)
At different temperatures:
55° C: 529 W
40° C: 460 W
25° C: 438 W
|
LEDs
|
OK/FAIL LED, one bicolor:
|
