input-traffic-control-profile
Syntax
input-traffic-control-profile profile-name shared-instance instance-name;
Hierarchy Level
[edit class-of-service interfaces interface-name], [edit class-of-service interfaces interface-name unit logical-unit-number]
Description
Apply an input traffic scheduling and shaping profile to the physical or logical interface.
The input-traffic-control-profile and input-scheduler-map
statements are mutually exclusive at the same hierarchy level.
The shared-instance statement applies only to Gigabit Ethernet IQ2 and
IQ2E PICs.
On many platforms, CoS queuing and scheduling are enabled on the egress side but disabled
on the ingress side by default. To enable ingress CoS on the ingress side, you must
configure the traffic-manager statement with ingress-and-egress
mode:
[edit chassis fpc slot-number pic pic-number] traffic-manager mode ingress-and-egress;
Options
profile-name—Name of the traffic-control profile to be applied to this
interface.
instance-name—Name of
the shared scheduler and shaper to be applied to this interface.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 7.6.