input-vlan-map
Syntax
input-vlan-map {
(pop | pop-pop | pop-swap | push | push-push | swap | swap-push | swap-swap);
inner-tag-protocol-id tpid;
inner-vlan-id number;
tag-protocol-id tpid;
vlan-id number;
}
Hierarchy Level
[edit interfaces interface-name unit logical-unit-number], [edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number]
Description
For Gigabit Ethernet IQ, 10-Gigabit Ethernet SFPP interfaces, 100-Gigabit Ethernet Type 5 PIC with CFP only as well as Gigabit Ethernet, 10-Gigabit Ethernet, 40-Gigabit Ethernet, and aggregated Ethernet interfaces, define the rewrite profile to be applied to incoming frames on this logical interface.
The remaining statements are explained separately. See CLI Explorer.
Connectivity fault management (CFM) sessions for all interfaces
in which input-vlan-map is configured are supported only
if the interface also has an explicit configuration for output-vlan-map as output-vlan-map pop;. See output-vlan-map . This configuration is required for
all the interfaces in the topology even when the CFM session is on
that interface or on a different interface in the data path of the
same topology.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Release Information
Statement introduced before Junos OS Release 7.4.
pop-pop, pop-swap, push-push, swap-push, and swap-swap statements introduced
in Junos OS Release 8.1.