close
keyboard_arrow_left
Table of Contents
- play_arrow Overview
- play_arrow Managing Group Membership
- play_arrow Configuring IGMP and MLD
- play_arrow Configuring IGMP Snooping
- IGMP Snooping Overview
- Overview of Multicast Forwarding with IGMP Snooping or MLD Snooping in an EVPN-VXLAN Environment
- Configuring IGMP Snooping on Switches
- Example: Configuring IGMP Snooping on Switches
- Example: Configuring IGMP Snooping on EX Series Switches
- Verifying IGMP Snooping on EX Series Switches
- Changing the IGMP Snooping Group Timeout Value on Switches
- Monitoring IGMP Snooping
- Example: Configuring IGMP Snooping
- Example: Configuring IGMP Snooping on SRX Series Devices
- Configuring Point-to-Multipoint LSP with IGMP Snooping
- play_arrow Configuring MLD Snooping
- Understanding MLD Snooping
- Configuring MLD Snooping on an EX Series Switch VLAN (CLI Procedure)
- Configuring MLD Snooping on a Switch VLAN with ELS Support (CLI Procedure)
- Example: Configuring MLD Snooping on EX Series Switches
- Example: Configuring MLD Snooping on SRX Series Devices
- Configuring MLD Snooping Tracing Operations on EX Series Switches (CLI Procedure)
- Configuring MLD Snooping Tracing Operations on EX Series Switch VLANs (CLI Procedure)
- Example: Configuring MLD Snooping on EX Series Switches
- Example: Configuring MLD Snooping on Switches with ELS Support
- Verifying MLD Snooping on EX Series Switches (CLI Procedure)
- Verifying MLD Snooping on Switches
- play_arrow Configuring Multicast VLAN Registration
-
- play_arrow Configuring Multicast Routing Protocols
- play_arrow Connecting Routing Domains Using MSDP
- play_arrow Handling Session Announcements with SAP and SDP
- play_arrow Facilitating Multicast Delivery Across Unicast-Only Networks with AMT
- play_arrow Routing Content to Densely Clustered Receivers with DVMRP
-
- play_arrow Configuring Multicast VPNs
- play_arrow Configuring Draft-Rosen Multicast VPNs
- Draft-Rosen Multicast VPNs Overview
- Example: Configuring Any-Source Draft-Rosen 6 Multicast VPNs
- Example: Configuring a Specific Tunnel for IPv4 Multicast VPN Traffic (Using Draft-Rosen MVPNs)
- Example: Configuring Source-Specific Draft-Rosen 7 Multicast VPNs
- Understanding Data MDTs
- Example: Configuring Data MDTs and Provider Tunnels Operating in Any-Source Multicast Mode
- Example: Configuring Data MDTs and Provider Tunnels Operating in Source-Specific Multicast Mode
- Examples: Configuring Data MDTs
- play_arrow Configuring Next-Generation Multicast VPNs
- Understanding Next-Generation MVPN Network Topology
- Understanding Next-Generation MVPN Concepts and Terminology
- Understanding Next-Generation MVPN Control Plane
- Next-Generation MVPN Data Plane Overview
- Enabling Next-Generation MVPN Services
- Generating Next-Generation MVPN VRF Import and Export Policies Overview
- Multiprotocol BGP MVPNs Overview
- Configuring Multiprotocol BGP Multicast VPNs
- BGP-MVPN Inter-AS Option B Overview
- ACX Support for BGP MVPN
- Example: Configuring MBGP MVPN Extranets
- Understanding Redundant Virtual Tunnel Interfaces in MBGP MVPNs
- Example: Configuring Redundant Virtual Tunnel Interfaces in MBGP MVPNs
- Understanding Sender-Based RPF in a BGP MVPN with RSVP-TE Point-to-Multipoint Provider Tunnels
- Example: Configuring Sender-Based RPF in a BGP MVPN with RSVP-TE Point-to-Multipoint Provider Tunnels
- Example: Configuring Sender-Based RPF in a BGP MVPN with MLDP Point-to-Multipoint Provider Tunnels
- Configuring MBGP MVPN Wildcards
- Distributing C-Multicast Routes Overview
- Exchanging C-Multicast Routes
- Generating Source AS and Route Target Import Communities Overview
- Originating Type 1 Intra-AS Autodiscovery Routes Overview
- Signaling Provider Tunnels and Data Plane Setup
- Anti-spoofing support for MPLS labels in BGP/MPLS IP VPNs (Inter-AS Option B)
- BGP-MVPN SD-WAN Overlay
- play_arrow Configuring PIM Join Load Balancing
- Use Case for PIM Join Load Balancing
- Configuring PIM Join Load Balancing
- PIM Join Load Balancing on Multipath MVPN Routes Overview
- Example: Configuring PIM Join Load Balancing on Draft-Rosen Multicast VPN
- Example: Configuring PIM Join Load Balancing on Next-Generation Multicast VPN
- Example: Configuring PIM Make-Before-Break Join Load Balancing
- Example: Configuring PIM State Limits
-
- play_arrow General Multicast Options
- play_arrow Bit Index Explicit Replication (BIER)
- play_arrow Prevent Routing Loops with Reverse Path Forwarding
- play_arrow Use Multicast-Only Fast Reroute (MoFRR) to Minimize Packet Loss During Link Failures
- play_arrow Enable Multicast Between Layer 2 and Layer 3 Devices Using Snooping
- play_arrow Configure Multicast Routing Options
- play_arrow Controller-Based BGP Multicast Signaling
-
- play_arrow Troubleshooting
- play_arrow Knowledge Base
-
- play_arrow Configuration Statements and Operational Commands
list Table of Contents
Changing the PIM Version
date_range
23-Nov-23
Starting in Junos OS Release 15.2, it is no longer necessary to configure the PIM version. Support for PIM version 1 has been removed and the remaining, default, version is PIM 2.
PIM version 2 is the default for both rendezvous point (RP)
mode (at the [edit protocols pim rp static address address] hierarchy level) and for interface mode
(at the [edit protocols pim interface interface-name] hierarchy level).
Change History Table
Feature support is determined by the platform and release you are using. Use Feature Explorer to determine if a feature is supported on your platform.
Release
Description
15.2
Starting in Junos OS Release
15.2, it is no longer necessary to configure the PIM version.
