close
keyboard_arrow_left
Table of Contents
- play_arrow Overview
- play_arrow Managing Group Membership
- play_arrow Configuring IGMP and MLD
- play_arrow Configuring IGMP Snooping
- IGMP Snooping Overview
- Overview of Multicast Forwarding with IGMP Snooping or MLD Snooping in an EVPN-VXLAN Environment
- Configuring IGMP Snooping on Switches
- Example: Configuring IGMP Snooping on Switches
- Example: Configuring IGMP Snooping on EX Series Switches
- Verifying IGMP Snooping on EX Series Switches
- Changing the IGMP Snooping Group Timeout Value on Switches
- Monitoring IGMP Snooping
- Example: Configuring IGMP Snooping
- Example: Configuring IGMP Snooping on SRX Series Devices
- Configuring Point-to-Multipoint LSP with IGMP Snooping
- play_arrow Configuring MLD Snooping
- Understanding MLD Snooping
- Configuring MLD Snooping on an EX Series Switch VLAN (CLI Procedure)
- Configuring MLD Snooping on a Switch VLAN with ELS Support (CLI Procedure)
- Example: Configuring MLD Snooping on EX Series Switches
- Example: Configuring MLD Snooping on SRX Series Devices
- Configuring MLD Snooping Tracing Operations on EX Series Switches (CLI Procedure)
- Configuring MLD Snooping Tracing Operations on EX Series Switch VLANs (CLI Procedure)
- Example: Configuring MLD Snooping on EX Series Switches
- Example: Configuring MLD Snooping on Switches with ELS Support
- Verifying MLD Snooping on EX Series Switches (CLI Procedure)
- Verifying MLD Snooping on Switches
- play_arrow Configuring Multicast VLAN Registration
-
- play_arrow Configuring Protocol Independent Multicast
- play_arrow Understanding PIM
- play_arrow Configuring PIM Basics
- Configuring Different PIM Modes
- Configuring Multiple Instances of PIM
- Changing the PIM Version
- Optimizing the Number of Multicast Flows on QFabric Systems
- Modifying the PIM Hello Interval
- Preserving Multicast Performance by Disabling Response to the ping Utility
- Configuring PIM Trace Options
- Configuring BFD for PIM
- Configuring BFD Authentication for PIM
- play_arrow Routing Content to Densely Clustered Receivers with PIM Dense Mode
- play_arrow Routing Content to Larger, Sparser Groups with PIM Sparse Mode
- Understanding PIM Sparse Mode
- Examples: Configuring PIM Sparse Mode
- Configuring Static RP
- Example: Configuring Anycast RP
- Configuring PIM Bootstrap Router
- Understanding PIM Auto-RP
- Configuring All PIM Anycast Non-RP Routers
- Configuring a PIM Anycast RP Router with MSDP
- Configuring Embedded RP
- Configuring PIM Filtering
- Examples: Configuring PIM RPT and SPT Cutover
- Disabling PIM
- play_arrow Configuring Designated Routers
- play_arrow Receiving Content Directly from the Source with SSM
- Understanding PIM Source-Specific Mode
- Example: Configuring Source-Specific Multicast
- Example: Configuring PIM SSM on a Network
- Example: Configuring an SSM-Only Domain
- Example: Configuring SSM Mapping
- Example: Configuring Source-Specific Multicast Groups with Any-Source Override
- Example: Configuring SSM Maps for Different Groups to Different Sources
- play_arrow Minimizing Routing State Information with Bidirectional PIM
- play_arrow Rapidly Detecting Communication Failures with PIM and the BFD Protocol
- play_arrow Configuring PIM Options
- play_arrow Verifying PIM Configurations
-
- play_arrow Configuring Multicast Routing Protocols
- play_arrow Connecting Routing Domains Using MSDP
- play_arrow Handling Session Announcements with SAP and SDP
- play_arrow Facilitating Multicast Delivery Across Unicast-Only Networks with AMT
- play_arrow Routing Content to Densely Clustered Receivers with DVMRP
-
- play_arrow Configuring Multicast VPNs
- play_arrow Configuring Draft-Rosen Multicast VPNs
- Draft-Rosen Multicast VPNs Overview
- Example: Configuring Any-Source Draft-Rosen 6 Multicast VPNs
- Example: Configuring a Specific Tunnel for IPv4 Multicast VPN Traffic (Using Draft-Rosen MVPNs)
- Example: Configuring Source-Specific Draft-Rosen 7 Multicast VPNs
- Understanding Data MDTs
- Example: Configuring Data MDTs and Provider Tunnels Operating in Any-Source Multicast Mode
- Example: Configuring Data MDTs and Provider Tunnels Operating in Source-Specific Multicast Mode
- Examples: Configuring Data MDTs
- play_arrow Configuring Next-Generation Multicast VPNs
- Understanding Next-Generation MVPN Network Topology
- Understanding Next-Generation MVPN Concepts and Terminology
- Understanding Next-Generation MVPN Control Plane
- Next-Generation MVPN Data Plane Overview
- Enabling Next-Generation MVPN Services
- Generating Next-Generation MVPN VRF Import and Export Policies Overview
- Multiprotocol BGP MVPNs Overview
- Configuring Multiprotocol BGP Multicast VPNs
- BGP-MVPN Inter-AS Option B Overview
- ACX Support for BGP MVPN
- Example: Configuring MBGP MVPN Extranets
- Understanding Redundant Virtual Tunnel Interfaces in MBGP MVPNs
- Example: Configuring Redundant Virtual Tunnel Interfaces in MBGP MVPNs
- Understanding Sender-Based RPF in a BGP MVPN with RSVP-TE Point-to-Multipoint Provider Tunnels
- Example: Configuring Sender-Based RPF in a BGP MVPN with RSVP-TE Point-to-Multipoint Provider Tunnels
- Example: Configuring Sender-Based RPF in a BGP MVPN with MLDP Point-to-Multipoint Provider Tunnels
- Configuring MBGP MVPN Wildcards
- Distributing C-Multicast Routes Overview
- Exchanging C-Multicast Routes
- Generating Source AS and Route Target Import Communities Overview
- Originating Type 1 Intra-AS Autodiscovery Routes Overview
- Signaling Provider Tunnels and Data Plane Setup
- Anti-spoofing support for MPLS labels in BGP/MPLS IP VPNs (Inter-AS Option B)
- BGP-MVPN SD-WAN Overlay
- play_arrow Configuring PIM Join Load Balancing
- Use Case for PIM Join Load Balancing
- Configuring PIM Join Load Balancing
- PIM Join Load Balancing on Multipath MVPN Routes Overview
- Example: Configuring PIM Join Load Balancing on Draft-Rosen Multicast VPN
- Example: Configuring PIM Join Load Balancing on Next-Generation Multicast VPN
- Example: Configuring PIM Make-Before-Break Join Load Balancing
- Example: Configuring PIM State Limits
-
- play_arrow Troubleshooting
- play_arrow Knowledge Base
-
- play_arrow Configuration Statements and Operational Commands
list Table of Contents
Example: Configuring Multicast Snooping for a Bridge Domain
date_range
23-Nov-23
This example configures the multicast snooping option for a bridge domain named Ignore-STP in a virtual switch routing instance named vs_routing_instance_multihomed_CEs:
content_copy zoom_out_map
[edit]
routing-instances {
vs_routing_instance_multihomed_CEs {
instance-type virtual-switch;
bridge-domains {
bd_ignore_STP {
multicast-snooping-options {
ignore-stp-topology-change;
}
}
}
}
}
Note:
This is not a complete router configuration.
