- play_arrow VXLAN (Without a Controller)
- play_arrow Using VXLAN Without a Controller
- play_arrow VXLAN Monitoring Commands
- Monitoring a Remote VTEP Interface
- Verifying VXLAN Reachability
- Verifying That a Local VXLAN VTEP Is Configured Correctly
- Verifying MAC Learning from a Remote VTEP
- Understanding Overlay ping and traceroute Packet Support
- Example: Troubleshoot a VXLAN Overlay Network with Overlay Ping and Overlay Traceroute for MX Series Routers
-
- play_arrow Configuration Statements and Operational Commands
Installing OVSDB on Juniper Networks Devices
The Open vSwitch Database (OVSDB) software is included in the jsdn package. For some Juniper Networks devices, the jsdn package is included in the Junos OS software (jinstall) package. On these Juniper Networks devices, you do not need to install the separate jsdn package, which means that you can skip the task described in this topic. For information about which devices do not require installation of the separate jsdn package, see OVSDB Support on Juniper Networks Devices.
If the jsdn package for your Juniper Networks device is not included in the jinstall package, you must copy a separate jsdn package to the Juniper Networks device and then install the package. The package name uses the following format:
jsdn-packageID-release
where:
packageID identifies the package that must run on each Juniper Networks device.
release identifies the release; for example, 16.2. The jsdn package release and the jinstall release running on the device must be the same.
To install the jsdn package on a Juniper Networks device:
