Additional Features

We've extended support for the following features to these platforms.

• OpenConfig LACP and LLDP configuration support (ACX5448 router, EX4650, and EX4650-48Y-VC switches, MX480, MX960, MX10003, and PTX10008 routers, , QFX10002-60C, QFX5110, QFX5110-VC, QFX5110-VCF, QFX5120-32C, QFX5120-48T, QFX5120-48T-VC, QFX5120-48Y, QFX5120-48Y-VC, QFX5120-48YM, QFX5200, QFX5210, , QFX10002, QFX10003, QFX10008, and QFX10016 switches). OpenConfig configuration support based on the OpenConfig data models openconfig-lacp.yang and openconfig-lldp.yang.

  [See Mapping OpenConfig LLDP Commands to Junos Configuration and OpenConfig User Guide.]

• PFE Restart Support (MX240, MX480, and MX960 with MPC7, MPC8, and MPC9 and MX10008, MX10016 with LC2101)
• PFE Reset Support (MX10008, MX10016 with LC2101) using command set chassis error severity threshold count action reset-pfe, for errors including ASIC errors. [See error and show chassis fpc errors.]

• Support for inline 6rd, Mapping of Address and Port with Encapsulation (MAP-E), NAT44, and NPTv6 (MX10008 with MX10K-LC2101 line card). The line card supports:

  • Inline 6rd
  • Mapping of Address and Port with Encapsulation (MAP-E)
  • Network Address Translator IPv4/IPv4 (NAT44)
  • Stateless Source Network Prefix Translation for IPv6 (NPTv6)

  [See Configuring Inline 6rd, Stateless Source Network Prefix Translation for IPv6 Configuring Mapping of Address and Port with Encapsulation (MAP-E).]

• Support for inline services (MX10008). MX10K-LC9600 line card supports inline services. The line card supports 4 inline services interfaces per PIC.

  [See bandwidth (Inline Services) .]

• Supported transceivers, optical interfaces, and DAC cables (EX Series, MX Series, and QFX Series). Select your product in the Hardware Compatibility Tool to view supported transceivers, optical interfaces, and DAC cables for your platform or interface module. We update the HCT and provide the first supported release information when the optic becomes available.

• Support for Synchronous Ethernet (MX10008 with MX10K-LC9600)

  [See Synchronous Ethernet Overview.]

• Support for Synchronous Ethernet over a link aggregation group (LAG) with ESMC (MX10008 with MX10K-LC9600)

  [See Synchronous Ethernet, and Ethernet Synchronization Message Channel (ESMC).]

• Support for the Juniper Resiliency Interface (MX10008 with MX10K-LC9600)

  [See Inline Monitoring Services Configuration.]

• Support for monitoring link degradation (MX10008 and MX10016 with MX10K-LC2101)

  [See Link Degrade Monitoring Overview.]

• System OpenConfig configuration support and gNMI mixed-mode support (ACX5448, MX240, MX480, MX960, MX10003, MX10008, MX10016, MX2008, MX2010, MX2020, and PTX10002)

  [See OpenConfig User Guide].

• Virtual gateway address and virtual gateway MAC address support in EVPN-MPLS CRB overlay fabrics (MX960, MX10008, and MX2020)

  [See Anycast Gateways, Understanding the MAC Addresses for a Default Virtual Gateway in an EVPN-VXLAN or EVPN-MPLS Overlay Network, virtual-gateway-address, virtual-gateway-v4-mac, and virtual-gateway-v6-mac.]

• VLAN-level MACsec on logical interfaces (EX9253 and QFX5120-48YM)

  [See Media Access Control Security (MACsec) over WAN.]