Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
ON THIS PAGE
 

Resolved Issues

Learn about the issues fixed in this release for ACX Series routers.

For the most complete and latest information about known Junos OS defects, use the Juniper Networks online Junos Problem Report Search application.

EVPN

  • The RPD process might generate core files upon receipt of a specific EVPN route by a BGP route reflector in an EVPN environment. PR1675054

General Routing

  • On ACX710 and ACX5448 devices working as a PE device stops forwarding Layer 3 VPN traffic after core-facing link flaps. PR1635801

  • If a firewall has a log action and applied on physical interface or lo0, the LDP are not able to go up. PR1648968

  • HTTP(S) file download becomes nonresponsive over EVPN-ETREE. PR1653531

  • On ACX5448 devices, physical interfaces of FPC remain up even though it lost communication with the Routing Engine. PR1659949

  • The Layer 2 circuit backup might not get reverted to primary in rare condition. PR1661802

  • On ACX5448 devices, Packet Forwarding Engine might crash after activating EVPN-ETREE service. PR1662686

  • Multicast upstream interface does not change to back up link when you remove or flap the PIM neighbor, and causes traffic. PR1663271

  • Adding an empty interface to an aggregated Ethernet interface bundle causes traffic drop. PR1663651

  • FXPC process might generate core files when deactivating a child memeber link from the aggregated Ethernet interface bundle. PR1665511

  • In the SRTE scenario, sensors gets incorrectly populated for colored tunnel BSID routes when you enable uncolored tunnels. PR1665943

  • Traffic loss occurs when you configure the VRRP over the aggregated Ethernet interface. PR1666853

  • On ACX710 and ACX5448 devices, the variants Packet Forwarding Engine might crash due to the configuration of BFD. PR1667129

  • Shutting the CE interface and bringing back up causes traffic (going towards the core) drops. PR1667724

  • LLDP neighborship might fail if the chassis-id format of the LLDP packet is xx:xx:xx:XX:XX:xx. PR1669677

  • On ACX710 devices, log related to resources gets reported after you activateor deactivate EVPN RI multiple times: ACX_BD_ERR: dnx_bd_alloc_l2_svlan: System reached L3 IFL and BD limit(12286). PR1670683

  • The chassisd memory gets corrupted and the chassisd crashes. PR1672039

  • MX-SPC3 PIC process generates core file when you modify a CPCD service. PR1675990

  • The LLDP packets does not get transmitted over the Layer 2 circuit. PR1678752

  • On ACX5448 devices, the RIO DNX Packet Forwarding Engine incorectly spelled as QUMARN instead of Qumran. PR1682819

  • On ACX710 devices, the IEEE 802.1p priority and DEI values in the locally generated VLAN-based IP packets might be changed when sourced from the IRB interface. PR1683770

  • On ACX5448 and ACX710 devices, the Layer 2 circuit traffic drops with control-word enabled or control-word configuration change. PR1683900

  • EVPN Traffic is classfied in the wrong queue. PR1689604

Network Management and Monitoring

  • The snmpd process might generate core file with filter-duplicates configuration. PR1669510

Routing Protocols

  • IPv6 Inline BFD sessions goes down when neighbor does not get resolved. PR1650677

  • Routing Process Daemon (rpd) crashes and restarts when a specific timing condition is hit with BGP configuration. PR1659441

  • MCSNOOPD will be restarted and will again learn the states after core. PR1672488