Default Services for DHCP Subscribers
Default Subscriber Service Overview
Subscriber management enables you to specify a default subscriber service for DHCP subscribers. The default service (dynamic profile) is applied to subscribers when the subscriber logs in. By configuring a default service, you can apply a particular service (for example, a basic service) to subscribers who are not explicitly assigned a service.
When a subscriber logs in, the configured default service is
always activated, even when remote service provisioning or RADIUS
service activation is configured for the subscriber. The default service
is deactivated only when the subscriber is successfully provisioned
by the PCRF by means of the GX-Plus application. (Remote provisioning
is configured by the provisioning-order
statement at the [edit access profile]
hierarchy level.)
In all other cases, the default service remains active. For example, if RADIUS authentication is configured but service activation is not, the default subscriber service remains activated. Likewise, if RADIUS authentication is not configured, the default subscriber service remains activated.
Default services can also be deactivated either with a RADIUS
CoA deactivate request or with the request network-access aaa
subscriber delete session-id
command.
To create and assign a default subscriber service, you must complete the following operations:
Create the service—Ensure that the service you want to use has been configured in a dynamic service profile. The actual service is no different than any other service used for subscriber management.
Specify the default service—Use the Junos OS CLI to specify the service that is used as the default service.
Specify the interfaces on which the default service is assigned —Use the Junos OS CLI to specify that the default service is used globally, for a group of interfaces, or for a specific interface.
Configuring a Default Subscriber Service
Subscriber management enables you to specify a default subscriber service for DHCP (and DHCPv6) local server and DHCP relay agent. The default service is the service (dynamic profile) that is applied to subscribers when they log in.
Default services are subsequently deactivated in any of the following circumstances:
A PCRF responds to AAA for the subscriber.
A RADIUS CoA deactivation request is issued.
You deactivate the service manually through the CLI.
To configure a default subscriber service: