close
keyboard_arrow_left
Table of Contents
- play_arrow Configuring Dynamic VLANs for Subscriber Access Networks
- play_arrow Dynamic VLAN Overview
- Subscriber Management VLAN Architecture Overview
- Dynamic 802.1Q VLAN Overview
- Static Subscriber Interfaces and VLAN Overview
- Pseudowire Termination: Explicit Notifications for Pseudowire Down Status
- Configuring an Access Pseudowire That Terminates into VRF on the Service Node
- Configuring an Access Pseudowire That Terminates into a VPLS Routing Instance
- play_arrow Configuring Dynamic Profiles and Interfaces Used to Create Dynamic VLANs
- Configuring a Dynamic Profile Used to Create Single-Tag VLANs
- Configuring an Interface to Use the Dynamic Profile Configured to Create Single-Tag VLANs
- Configuring a Dynamic Profile Used to Create Stacked VLANs
- Configuring an Interface to Use the Dynamic Profile Configured to Create Stacked VLANs
- Configuring Interfaces to Support Both Single and Stacked VLANs
- Overriding the Dynamic Profile Used for an Individual VLAN
- Configuring a VLAN Dynamic Profile That Associates VLANs with Separate Routing Instances
- Automatically Removing VLANs with No Subscribers
- Verifying and Managing Dynamic VLAN Configuration
- play_arrow Configuring Subscriber Authentication for Dynamic VLANs
- Configuring an Authentication Password for VLAN or Stacked VLAN Ranges
- Configuring Dynamic Authentication for VLAN Interfaces
- Subscriber Packet Type Authentication Triggers for Dynamic VLANs
- Configuring Subscriber Packet Types to Trigger VLAN Authentication
- Configuring VLAN Interface Username Information for AAA Authentication
- Using DHCP Option 82 Suboptions in Authentication Usernames for Autosense VLANs
- Using DHCP Option 18 and Option 37 in Authentication Usernames for DHCPv6 Autosense VLANs
- play_arrow Configuring VLANs for Households or Individual Subscribers Using ACI-Based Dynamic VLANs
- Agent Circuit Identifier-Based Dynamic VLANs Overview
- Configuring Dynamic VLANs Based on Agent Circuit Identifier Information
- Defining ACI Interface Sets
- Configuring Dynamic Underlying VLAN Interfaces to Use Agent Circuit Identifier Information
- Configuring Static Underlying VLAN Interfaces to Use Agent Circuit Identifier Information
- Configuring Dynamic VLAN Subscriber Interfaces Based on Agent Circuit Identifier Information
- Verifying and Managing Agent Circuit Identifier-Based Dynamic VLAN Configuration
- Clearing Agent Circuit Identifier Interface Sets
- play_arrow Configuring VLANs for Households or Individual Subscribers Using Access-Line-Identifier Dynamic VLANs
- Access-Line-Identifier-Based Dynamic VLANs Overview
- Configuring Dynamic VLANs Based on Access-Line Identifiers
- Defining Access-Line-Identifier Interface Sets
- Configuring Dynamic Underlying VLAN Interfaces to Use Access-Line Identifiers
- Configuring Static Underlying VLAN Interfaces to Use Access-Line Identifiers
- Configuring Dynamic VLAN Subscriber Interfaces Based on Access-Line Identifiers
- Verifying and Managing Configurations for Dynamic VLANs Based on Access-Line Identifiers
- Clearing Access-Line-Identifier Interface Sets
- play_arrow High Availability for Service VLANs
-
- play_arrow Configuring DHCP Subscriber Interfaces
- play_arrow VLAN and Demux Subscriber Interfaces Overview
- play_arrow Configuring Sets of Demux Interfaces to Provide Services to a Group of Subscribers
- play_arrow Configuring Dynamic Demux Interfaces That are Created by DHCP
- play_arrow Configuring DHCP Subscriber Interfaces over Aggregated Ethernet
- Static and Dynamic VLAN Subscriber Interfaces over Aggregated Ethernet Overview
- Static or Dynamic Demux Subscriber Interfaces over Aggregated Ethernet Overview
- Configuring a Static or Dynamic VLAN Subscriber Interface over Aggregated Ethernet
- Configuring a Static or Dynamic IP Demux Subscriber Interface over Aggregated Ethernet
- Configuring a Static or Dynamic VLAN Demux Subscriber Interface over Aggregated Ethernet
- Example: Configuring a Static Subscriber Interface on a VLAN Interface over Aggregated Ethernet
- Example: Configuring a Static Subscriber Interface on an IP Demux Interface over Aggregated Ethernet
- Example: Configuring IPv4 Static VLAN Demux Interfaces over an Aggregated Ethernet Underlying Interface with DHCP Local Server
- Example: Configuring IPv4 Dynamic VLAN Demux Interfaces over an Aggregated Ethernet Underlying Interface with DHCP Local Server
- Example: Configuring IPv6 Dynamic VLAN Demux Interfaces over an Aggregated Ethernet Underlying Interface with DHCP Local Server
- Example: Configuring IPv4 Dynamic Stacked VLAN Demux Interfaces over an Aggregated Ethernet Underlying Interface with DHCP Local Server
- play_arrow Using Dynamic Profiles to Apply Services to DHCP Subscriber Interfaces
- play_arrow Configuring DHCP IP Demux and PPPoE Demux Interfaces Over the Same VLAN
- play_arrow Providing Security for DHCP Interfaces Using MAC Address Validation
- play_arrow RADIUS-Sourced Weights for Targeted Distribution
- play_arrow Verifying Configuration and Status of Dynamic Subscribers
-
- play_arrow Configuring PPPoE Subscriber Interfaces
- play_arrow Configuring Dynamic PPPoE Subscriber Interfaces
- Subscriber Interfaces and PPPoE Overview
- Dynamic PPPoE Subscriber Interfaces over Static Underlying Interfaces Overview
- Configuring Dynamic PPPoE Subscriber Interfaces
- Configuring a PPPoE Dynamic Profile
- Configuring an Underlying Interface for Dynamic PPPoE Subscriber Interfaces
- Configuring the PPPoE Family for an Underlying Interface
- Ignoring DSL Forum VSAs from Directly Connected Devices
- Example: Configuring a Dynamic PPPoE Subscriber Interface on a Static Gigabit Ethernet VLAN Interface
- play_arrow Configuring PPPoE Subscriber Interfaces over Aggregated Ethernet Examples
- Example: Configuring a Static PPPoE Subscriber Interface on a Static Underlying VLAN Demux Interface over Aggregated Ethernet
- Example: Configuring a Dynamic PPPoE Subscriber Interface on a Static Underlying VLAN Demux Interface over Aggregated Ethernet
- Example: Configuring a Dynamic PPPoE Subscriber Interface on a Dynamic Underlying VLAN Demux Interface over Aggregated Ethernet
- play_arrow Configuring PPPoE Session Limits
- play_arrow Configuring PPPoE Subscriber Session Lockout
- play_arrow Configuring MTU and MRU for PPP Subscribers
- play_arrow Configuring PPPoE Service Name Tables
- Understanding PPPoE Service Name Tables
- Evaluation Order for Matching Client Information in PPPoE Service Name Tables
- Benefits of Configuring PPPoE Service Name Tables
- Creating a Service Name Table
- Configuring PPPoE Service Name Tables
- Assigning a Service Name Table to a PPPoE Underlying Interface
- Configuring the Action Taken When the Client Request Includes an Empty Service Name Tag
- Configuring the Action Taken for the Any Service
- Assigning a Service to a Service Name Table and Configuring the Action Taken When the Client Request Includes a Non-zero Service Name Tag
- Assigning an ACI/ARI Pair to a Service Name and Configuring the Action Taken When the Client Request Includes ACI/ARI Information
- Assigning a Dynamic Profile and Routing Instance to a Service Name or ACI/ARI Pair for Dynamic PPPoE Interface Creation
- Limiting the Number of Active PPPoE Sessions Established with a Specified Service Name
- Reserving a Static PPPoE Interface for Exclusive Use by a PPPoE Client
- Example: Configuring a PPPoE Service Name Table
- Example: Configuring a PPPoE Service Name Table for Dynamic Subscriber Interface Creation
- Troubleshooting PPPoE Service Name Tables
- play_arrow Changing the Behavior of PPPoE Control Packets
- play_arrow Monitoring and Managing Dynamic PPPoE for Subscriber Access
-
- play_arrow Configuring ATM for Subscriber Access
- play_arrow Configuring ATM to Deliver Subscriber-Based Services
- play_arrow Configuring PPPoE Subscriber Interfaces Over ATM
- play_arrow Configuring ATM Virtual Path Shaping on ATM MICs with SFP
- play_arrow Configuring Static Subscriber Interfaces over ATM
- play_arrow Verifying and Managing ATM Configurations
-
- play_arrow Troubleshooting
- play_arrow Contacting Juniper Networks Technical Support
- play_arrow Knowledge Base
-
- play_arrow Configuration Statements and Operational Commands
list Table of Contents
Attaching Dynamic Profiles to MLPPP Bundles
date_range
05-Dec-23
You can attach a dynamic profile to a static MLPPP bundle interface. When a PPP subscriber logs in on a member link, the specified dynamic profile is instantiated and the services defined in the profile are applied to the LSQ bundle interface.
To attach a dynamic profile to a static LSQ MLPPP bundle interface:
