Configuring Access Components for the PPPoE Wholesale Network Solution
When configuring a wholesale network, you must configure several components globally. This configuration provides access to RADIUS servers (if used) that you want the wholesaler and any configured retailers to use globally. The access configuration includes the following general steps:
Configuring RADIUS Server Access
You can globally define any RADIUS servers in your network that either the wholesale access profile or retailer access profile can use. After you define the global RADIUS servers, you can specify specific RADIUS servers within individual access profiles.
To define RADIUS servers for profile access:
See Also
Configuring a PPPoE Wholesaler Access Profile
You must define the network and interface over which you want subscribers to initially access the network with a wholesale access profile. When a subscriber attempts to access the network, the access profile provides initial access information including authentication and accounting values that the router uses for the accessing subscriber.
To define a wholesale access profile:
See Also
Configuring PPPoE Retailer Access Profiles
In this solution, subscribers are redirected to a networking space used by a specific retailer and defined by a unique routing instance. This method requires that you define the network and interface over which you want subscribers to access the network after being redirected by the wholesale access profile.
To define a retailer access profile: