Guidelines for Configuring Locality Bias in a Virtual Chassis
Starting in Junos OS 14.1, you can configure locality bias in an MX Series Virtual Chassis. Consider the following guidelines when doing so:
Make sure you know the total and available amounts of bandwidth in your network. Enabling locality bias when local egress links do not have enough bandwidth to support additional traffic can result in immediate traffic loss. The system does not prevent configurations that result in oversubscription.
Locality bias directs only user traffic toward the local member router. Locality bias does not affect load balancing of control traffic within the Virtual Chassis.
You cannot configure adaptive aggregated Ethernet load balancing and locality bias together.
You cannot configure weighted load balancing and locality bias together.
Change History Table
Feature support is determined by the platform and release you are using. Use Feature Explorer to determine if a feature is supported on your platform.