ON THIS PAGE
About the NAT Pools Page
You are here: Network > NAT > Pools.
A NAT pool is a set of IP addresses that you can define and use for translation. NAT policies perform address translation by translating internal IP addresses to the addresses in these pools. Unlike static NAT, where there is a one-to-one mapping that includes destination IP address translation in one direction and source IP address translation in the reverse direction, with source NAT, you translate the original source IP address to an IP address in the address pool. With destination NAT, you translate the original destination address to an IP address in the address pool.
Use this page to configure source and destination NAT pools.
Tasks You Can Perform
You can perform the following tasks from this page:
Add a global option. See Global Options.
Create a source NAT pool. See Create a Source NAT Pool.
Edit a source NAT pool. See Edit a Source NAT Pool.
Delete a source NAT pool. See Delete Source NAT Pool.
Add a destination NAT pool. See Add a Destination NAT Pool.
Edit a destination NAT pool. See Edit a Destination NAT Pool.
Delete a destination NAT pool. See Delete Destination NAT Pool.
Field Descriptions
Table 1 describes the fields on the NAT Pools Page.
Field |
Description |
|---|---|
Pool Name |
Displays the NAT pool name. |
Pool Type |
Displays whether the NAT pool is either source or destination. |
Pool Address |
Displays the NAT pool address. |
Proxy ARP/ND |
Displays the Address Resolution Protocol (ARP) proxy or Neighbor Discovery Protocol (NDP) proxy for the NAT pool. |
Description |
Displays the description for the NAT pool. |